GRESM/3/hwSidResourceTotalCountExceed_active

Message

GRESM/3/hwSidResourceTotalCountExceed_active: The total number of used SID resources exceeded a specified upper limit.(SIDPoolID=[SIDPoolID],ResourceCurrentCount=[ResourceCurrentCount],ResourceTotalCount=[ResourceTotalCount])

In VS mode, this log is supported only by the admin VS.

Description

The total number of used SID resources exceeded a specified upper limit.

Parameters

Parameter Name	Parameter Meaning
SIDPoolID	SID
ResourceCurrentCount	Number of used SIDs
ResourceTotalCount	Total number of SIDs

Possible Causes

SID resource usage reached a specified upper limit.

Procedure

1. Run the display gresm sid-pool command to check the SID range. The number of used SIDs reached a specified upper limit. Re-plan the SID resources and delete some unwanted services that use the SIDs. Then check whether the hwSidResourceTotalCountExceedClear alarm is generated.

If the clear alarm is generated, go to Step 3.
If the clear alarm is not generated, go to Step 2.

2. Collect the trap information, log information, and configuration information, and then contact Huawei technical support personnel.

3. End.