SRPOLICY/2/hwSrPolicyBsidConflict_active: Allocating a binding SID to an SR Policy fails.(Endpoint=[hwSrPolicyEndpoint], Color=[hwSrPolicyColor], BSID=[hwSrPolicyBsid], Reason=[hwSrPolicyBsidFailReason], ConflictState=[hwSrPolicyConflictState])
In VS mode, this log is supported only by the admin VS.
| Parameter Name | Parameter Meaning |
|---|---|
|
hwSrPolicyEndpoint |
Endpoint |
|
hwSrPolicyColor |
Color value |
|
hwSrPolicyBsid |
Binding SID |
|
hwSrPolicyBsidFailReason |
Reasons for failure in BSID allocated |
|
hwSrPolicyConflictState |
Conflict state indicates the current conflict state. |
1. The binding SID of a manually configured SR Policy is the same as that of a different SR Policy dynamically delivered by BGP.
2. Different SR Policies dynamically delivered by BGP have the same binding SID.
1. On the alarm device, run the display sr-te policy binding-sid allocation sid-value command to query the SR Policy that uses the binding SID and change the binding SID of the SR Policy reporting the alarm.
2. Collect alarm and configuration information, and contact technical support engineers.