OSPF/3/hwSrPrefixSidConflict_clear

Message

OSPF/3/hwSrPrefixSidConflict_clear: The prefix-sid conflict is resolved.(SrProtocol=[hwSrProtocol], SrProcessId=[hwSrProcessId], SrPrefixSid=[hwSrPrefixSid], SrPrefixAddress=[hwSrPrefixAddress], SrPrefixAddressMask=[hwSrPrefixAddressMask], SrConflictType=[hwSrConflictType], SrConflictState=[hwSrConflictState])

Parameters

Parameter Name	Parameter Meaning
hwSrProtocol	Segment Routing protocol that raised the alarm. 1. OSPF: A conflict within the same process in the OSPF protocol, and the prefix-sid in the conflict state displays OSPF. 2. ISIS: A conflict within the same process in the ISIS protocol, and the prefix-sid in the conflict state displays ISIS. 3. OSPF-SR: A conflict between the OSPF protocol and other protocols, the OSPF protocol is not preferred, or the OSPF protocol conflicts between processes, an OSPF process is not preferred, then the hwSrProtocol of the prefix-sid in the conflict state displays OSPF-SR. 4. ISIS-SR: A conflict between the ISIS protocol and other protocols, the ISIS protocol is not preferred, or the ISIS protocol conflicts between processes, an ISIS process is not preferred, then the hwSrProtocol of the prefix-sid in the conflict state displays ISIS-SR. 5. IGP-SR: A conflict between the label of IGP-SR and BGP-SR, the label of IGP-SR is not preferred, then the hwSrProtocol of the prefix-sid in the conflict state displays IGP-SR.
hwSrProcessId	Process ID
hwSrPrefixSid	Prefix Sid
hwSrPrefixAddress	The Prefix Address configured in the Loopback Interface.
hwSrPrefixAddressMask	Prefix Ip Address Mask.
hwSrConflictType	Conflict type can be Prefix Sid conflict or Prefix conflict. 1. SidConflict 2. PrefixConflict
hwSrConflictState	Conflict state indicates the current conflict state.

Possible Causes

No prefix-sid conflict is detected.

Procedure

This trap message is informational only, and no action is required.