SYSTEM/2/hwStorageUtilizationRisingAlarm_clear

Message

SYSTEM/2/hwStorageUtilizationRisingAlarm_clear: The storage usage falls below the pre-set clear threshold. (TrapSeverity=[TrapSeverity], ProbableCause=[ProbableCause], EventType=[EventType], PhysicalIndex=[PhysicalIndex], PhysicalName=[PhysicalName], RelativeResource=[RelativeResource], UsageType=[UsageType], SubIndex=[SubIndex], UsageValue=[UsageValue], Unit=[Unit], UsageThreshold=[UsageThreshold])

In VS mode, this log is supported only by the admin VS.

Parameters

Parameter Name	Parameter Meaning
TrapSeverity	Alarm severity.
ProbableCause	Alarm cause. The values are as follows: 75264: The memory usage exceeds the overload threshold. 75265: The storage medium usage exceeds the alarm threshold. 75268: The storage medium usage exceeds the alarm upper limit. 75269: The memory usage of a process exceeds the specified overload threshold. 75271: The forwarding CPU memory usage of the board exceeds the default overload threshold.
EventType	Alarm type.
PhysicalIndex	Index of the physical entity.
PhysicalName	Entity name.
RelativeResource	Resource name.
UsageType	Overload type. 1: CPU; 2: memory; 3: disk; 4: flash memory; 5: CF card; 6: physical memory.
SubIndex	Entity sub-index.
UsageValue	Usage.
Unit	Unit.
UsageThreshold	Threshold.

Possible Causes

Cause 75264:The fault was rectified when the memory usage exceeded the pre-set overload threshold.
Cause 75265:The fault was rectified when the storage usage of the CF card exceeded the pre-set overload threshold
Cause 75268:The fault was rectified when the storage usage of the CF card exceeded the pre-set fully loaded threshold.
Cause 75269:The fault was rectified when the memory usage of one process exceeded the pre-set overload threshold. The max memory size is 3G for one process.
Cause 75271:The fault was rectified when the forwarding CPU memory usage exceed the preset threshold.

Procedure

This message is informational only, and no action is required.