SYSTEM/2/hwSystemConfigError_active-144130

Message

SYSTEM/2/hwSystemConfigError_active: A system configuration error occurs. ( EntityTrapFaultID = [EntityTrapFaultID])

In VS mode, this log is supported only by the admin VS.

Description

The system configuration is incorrect.

Parameters

Parameter Name	Parameter Meaning
EntityTrapFaultID	Trap error code: 144128: The PAF version is inconsistent with the version of the startup software package. 144129: The boards and subcards of the device are not inserted into the corresponding slots. 144130: The versions of the active and standby main control boards are inconsistent. 144133: The memory of the active main control board is inconsistent with that of the standby main control board. 144134: The PTN startup mode does not match the mode selected during license activation.

Parameter Name

Parameter Meaning

EntityTrapFaultID

Trap error code:

144128: The PAF version is inconsistent with the version of the startup software package.
144129: The boards and subcards of the device are not inserted into the corresponding slots.
144130: The versions of the active and standby main control boards are inconsistent.
144133: The memory of the active main control board is inconsistent with that of the standby main control board.
144134: The PTN startup mode does not match the mode selected during license activation.

Possible Causes

The software versions on the master and slave control boards are inconsistent.

Procedure

The versions of the active and standby boards are inconsistent.

1. Run the startup system-software command to change the version of the slave board to be the same as that of the master board. Then, run the reset slot command to reset the slave board.

If the alarm is cleared, go to Step 3.
If the alarm persists, go to Step 2.

2. Collect alarm and configuration information, and contact technical support personnel.

3. No further action is required.