FEI_7021/4/hwTmPerformanceALarm_active

Message

FEI_7021/4/hwTmPerformanceALarm_active: A TM performance threshold-crossing alarm is generated. (EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityType=[EntityType], EntityTrapFaultID=[EntityTrapFaultID], Reason=[Reason])

This log is supported only on NetEngine 8000 F2A.

In VS mode, this log is supported only by the admin VS.

Description

The traffic exceeds the forwarding capability of the TM module.

Parameters

Parameter Name Parameter Meaning

EntityPhysicalIndex

Physical entity index.

EntPhysicalIndex

Physical entity index.

EntPhysicalName

Physical entity name.

EntityType

Physical entity type. The value can be one of the following:

1: lpu(1) .

2: mpu(2).

EntityTrapFaultID

Fault code.

Reason

Fault cause.

Possible Causes

  • Cause 151552: The traffic exceeds the forwarding capability of the TM chip.
  • Cause 151553: The idle queue resources of the TM system are insufficient.
  • Cause 151554: The idle queue resources of the TM system are exhausted.
  • Cause 151555: The idle port queue resources of the TM system are insufficient.
  • Cause 151556: The idle port queue resources of the TM system are exhausted.
  • Cause 151557: The number of isolated system VSQ resources exceeds the upper limit.

Procedure

  • Cause 151552: The traffic exceeds the forwarding capability of the TM chip.

    1.Check whether the multicast service configuration exceeds the limit.

    • If yes, modify the multicast service configuration.
    • If not, go to Step 2.

    2.Collect alarm, log, and configuration information, and contact technical support personnel.

    3.End.

  • Cause 151553: The idle queue resources of the TM system are insufficient.

    1.Check the current VSQ resource usage.

    2.End.

  • Cause 151554: The idle queue resources of the TM system are exhausted.

    1.Check the current VSQ resource usage.

    2.End.

  • Cause 151555: The idle port queue resources of the TM system are insufficient.

    1.Check the current RSQ resource usage.

    2.End.

  • Cause 151556: The idle port queue resources of the TM system are exhausted.

    1.Check the current RSQ resource usage.

    2.End.

  • Cause 151557: The number of isolated system VSQ resources exceeds the upper limit.

    1.Check the current VSQ resource isolation quantity.

    2.End.

Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
Next topic >