FEI_NQA/3/hwTwampServiceNotSupport_active

1. Check whether the type of services on the interface bound to the TWAMP reflector is VLL.

-If the type is VLL(svc mode vpws/ldp mode vpws/vss mode vpws/bgp mode vpws), go to step 3.

-If the type is not VLL, go to step 2.

2. Configure supported VLL service types on the interface bound to the TWAMP reflector.

• If the alarm is cleared, go to step 4.
• If the alarm is not cleared, go to step 3.

3. Collect the alarm, log, and configuration information and contact Huawei technical support personnel.

4. End.