AM/4/hwUsedIPReachThreshold_active

Message

AM/4/hwUsedIPReachThreshold_active: The number of IP addresses in the IP pool exceeds the threshold. (PoolIndex=[PoolIndex],PoolName=[PoolName])

Description

The number of IP addresses in the address pool exceeded the threshold.

Parameters

Parameter Name	Parameter Meaning
PoolIndex	Address pool index
PoolName	Address pool name

Possible Causes

The number of IP addresses in the address pool exceeded the threshold.

Procedure

1. Run the display ip pool command to view the status of IP addresses in the address pool.

If the address pool contains conflicting IP addresses, go to Step 2.
If some IP addresses in the address pool have not been used, go to Step 3.

2. Run the conflict auto-recycle command to configure the interval for automatically reclaiming conflicting IP addresses. After conflicting IP addresses are reclaimed, these IP addresses become available and can be assigned to clients.

3. Run the recycle command to reclaim the IP addresses for further assignment.