BRASAAA/4/hwUserIPAllocAlarm_active
Message
BRASAAA/4/hwUserIPAllocAlarm_active: The IP address usage of the domain [domainName] reached the upper threshold. (Domain index = [domainIndex],Threshold=[threshold])
In VS mode, this log is supported only by the admin VS.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
|
domainName |
Indicates the name of the domain. |
|
domainIndex |
Indicates the index of the domain |
|
threshold |
Indicates the upper threshold. |
Possible Causes
The number of IP addresses used by the users in the domain reached the upper threshold.
Procedure
1.In any view, run the display domain domain-name command to view the value of ip-warning-threshold configured for the domain.
- If the value of ip-warning-threshold ranges from 1 (included) to 100 (excluded), go to Step 2.
- If the value of ip-warning-threshold is null or 100, go to Step 4.
2.Check whether the number of online users planned in the current networking, who use the IP addresses in the local address pool of the domain, reaches the maximum limit.
- If so, go to Step 5.
- If not, go to Step 3.
3.Associate the domain to more address pools or configure new users to go online from other domains. Check whether the alarm is still generated after 30 minutes.
- If so, go to Step 5.
- If not, go to Step 4.
4.Collect the trap information, log information, and configuration information, and contact technical personnel.
5.End.