BRASAAA/4/hwUserSlotMaxNum_active
Message
BRASAAA/4/hwUserSlotMaxNum_active: The number of user resources on the board reached the threshold. (Slot=[slotid],SlotMaxUserThreshold=[threshold])
In VS mode, this log is supported only by the admin VS.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
|
slotid |
ID of the slot through which users go online |
|
threshold |
Upper threshold for the number of user resources |
Possible Causes
Cause 1:
The number of access users exceeded the threshold.
Cause 2:
The threshold was set too small.
Procedure
1.In the system view, run the display this command to check whether the user resource threshold (slot-warning-threshold) is set too small.
- If the threshold is set too small, re-configure it.
- If the threshold is properly set, go to Step 2.
2.In the system view, run the display access-user slot slot-id command to check whether the number of users reaches the threshold of the board. If so, replace the board with a new one that can accommodate more user resources or go to Step 3.
3.Collect alarm, log, and configuration information, and contact technical support personnel.
4.End.