BRASAM/4/hwVPNIPPoolUsageReachThreshold_active
Message
BRASAM/4/hwVPNIPPoolUsageReachThreshold_active: The IP address usage of the vpn reached the threshold.(VPNInstance=[VPNName],Threshold=[threshold])
In VS mode, this log is supported only by the admin VS.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
|
VPNName |
Name of a VPN instance. |
|
threshold |
Alarm threshold for the IPv4 address usage. |
Possible Causes
The number of IPv4 access users increased. As a result, the address usage of the IPv4 address pools bound to the VPN instance reached the threshold.
Procedure
1.Increase the number of assignable IPv4 addresses using the section command in the view of the address pool bound to the VPN instance, bind more IPv4 address pools to the VPN instance, or set a larger alarm threshold for the address usage of the IPv4 address pools bound to the VPN instance using the ip-pool warning-threshold threshold command in the VPN instance view. Then check whether the trap message is cleared.
-If the trap message is cleared, go to Step 3.
-If the trap message persists, go to Step 2.
2.Collect trap, log, and configuration information and contact Huawei technical support engineers.
3.End.