BRASAM/4/hwVPNIPv6PoolUsageReachThreshold_active

Message

BRASAM/4/hwVPNIPv6PoolUsageReachThreshold_active: The IPv6 address usage of the vpn reached the threshold.(VPNInstance=[VPNName],Threshold=[threshold])

This log is supported only on NetEngine 8000 F1A.

In VS mode, this log is supported only by the admin VS.

Description

The IPv6 address usage of the vpn reached the threshold.

Parameters

Parameter Name	Parameter Meaning
VPNName	Name of a VPN instance.
threshold	Alarm threshold for the IPv6 address usage.

Possible Causes

The ipv6 access user number of the vpn-instance has passed the threshold.

Procedure

1.Increase the number of assignable IPv6 addresses using the section command in the view of the address pool bound to the VPN instance, bind more IPv6 address pools to the VPN instance, or set a larger alarm threshold for the IPv6 address usage of the address pools bound to the VPN instance using the ipv6-pool warning-threshold threshold command in the VPN instance view. Then check whether the trap message is cleared.

-If the trap message is cleared, go to Step 3.

-If the trap message persists, go to Step 2.

2.Collect trap, log, and configuration information and contact Huawei technical support engineers.

3.End.