NAT/2/hwVSUServiceFaultAlarm_clear: VSU service fault alarm cleared.(FaultCode=[FaultCode], FaultKey=[FaultKey], ReasonDescription=[ReasonDescription], BoardName=[BoardName], Cpu=[Cpu])
In VS mode, this log is supported only by the admin VS.
Parameter Name | Parameter Meaning |
---|---|
FaultCode |
Fault Code. |
FaultKey |
Fault Key. |
ReasonDescription |
Reason Description. |
BoardName |
Name of an installed board. |
Cpu |
CPU ID of the service board. |
This trap message is informational only, and no action is required.
This trap message is informational only, and no action is required.
The number of user login failures is detected at an interval of 20 seconds. This alarm is generated if the number of centralized user login failures exceeds 10000 within the 20-second interval for three or more consecutive times. This alarm is cleared if the number of centralized user login failures is less than 1000 within the 20-second interval for three or more consecutive times.
This trap message is informational only, and no action is required.
This trap message is informational only, and no action is required.
This trap message is informational only, and no action is required.
This trap message is informational only, and no action is required.
This trap message is informational only, and no action is required.
This trap message is informational only, and no action is required.
This trap message is informational only, and no action is required.
This trap message is informational only, and no action is required.