L2VPN/4/hwVllVpnQosNotSupportTunnelAlarm_active: The public network tunnel to which the VLL service is diverted does not support traffic forwarding. (InterfaceName=[hwVLLACPortName], RemoteIP=[hwVLLPeerRemoteIp], TunnelType=[hwNotSupportTunnelType])
A VLL service with VPN QoS configured is diverted to an unsupported public network tunnel.
| Parameter Name | Parameter Meaning |
|---|---|
|
hwVLLACPortName |
VLL AC interface. |
|
hwVLLPeerRemoteIp |
VLL remote peer IP address. |
|
hwNotSupportTunnelType |
Tunnel type. |
1. Locate the interface based on the AC interface name in the alarm. Run the display this command in the interface view to check the bound tunnel policy. In the tunnel policy view, run the tunnel select-seq lsp load-balance-number command to change the tunnel to another type of tunnel. Then check whether the alarm is cleared.
2. Collect the trap information, log information, and configuration information, and then contact technical support personnel.
3. End.