L2VPN/4/hwVllVpnQosOverTunnelAlarm_active

Message

L2VPN/4/hwVllVpnQosOverTunnelAlarm_active: VLL VPN QoS services are not supported on the public network tunnel. (InterfaceName=[hwVLLACPortName], RemoteIP=[hwVLLPeerRemoteIp], TunnelType=[hwNotSupportTunnelType])

Description

VLL VPN QoS services are not supported on the public network tunnel.

Parameters

Parameter Name	Parameter Meaning
hwVLLACPortName	VLL AC interface.
hwVLLPeerRemoteIp	VLL remote peer IP address.
hwNotSupportTunnelType	tunnel type.

Possible Causes

The VLL VPN QoS service is carried over a GRE tunnel.

Procedure

1.Locate the interface based on the ac interface name in the alarm. Run the display this command in the interface view to check the bound tunnel policy. In the tunnel policy view, run the tunnel select-seq lsp load-balance-number command to change the tunnel to another type of tunnel.Then check whether the alarm is cleared.

If the alarm is cleared, go to Step 3.
If the alarm persists, go to step 2.

2.Collect the trap information, log information, and configuration information, and then contact technical support personnel.

3.End.