DEVM/1/hwVoltFallingAlarm_clear

Message

DEVM/1/hwVoltFallingAlarm_clear: Voltage resumed from exceeding the lower prealarm limit. (BaseTrapSeverity=[BaseTrapSeverity], BaseTrapProbableCause=[BaseTrapProbableCause], BaseTrapEventType=[BaseTrapEventType], EntityPhysicalIndex=[EntityPhysicalIndex], EntPhysicalName=[EntPhysicalName], BaseThresholdValue=[BaseThresholdValue], BaseThresholdUnit=[BaseThresholdUnit], LowCritical=[BaseThresholdLowCritical], LowWarning=[BaseThresholdLowWarning])

In VS mode, this log is supported only by the admin VS.

Parameters

Parameter Name	Parameter Meaning
BaseTrapSeverity	Indicates the level of trap.
BaseTrapProbableCause	Indicates the possible cause of trap.
BaseTrapEventType	Indicates the type of trap.
EntityPhysicalIndex	Indicates the physical index.
EntPhysicalName	Indicates the textual name of the physical entity.
BaseThresholdValue	Indicates the actual value.
BaseThresholdUnit	Indicates the unit of the value (mV).
BaseThresholdLowCritical	Indicates the upper critical limit.
BaseThresholdLowWarning	Indicates the minor upper limit.

Possible Causes

Cause 73216:Voltage resumed from exceeding the lower critical threshold.
Cause 73217:Voltage resumed from exceeding the lower major threshold.

Procedure

This trap message is informational only, and no action is required.