L2VPN/2/hwVplsVcDown_clear

Message

L2VPN/2/hwVplsVcDown_clear: The status of the VPLS VC turned UP. (VsiName=[VsiName], PwId=[PwId], RemoteIp=[RemoteIp], PwType=[PwType], HWL2VpnStateChangeReason=[HWL2VpnStateChangeReason], SysUpTime=[SysUpTime], TunnelPolicyName=[TunnelPolicyName])

Parameters

Parameter Name Parameter Meaning

VsiName

Indicates the name of a VSI.

PwId

Indicates the ID of a PW.

RemoteIp

Indicates the IP address of the remote peer.

PwType

Indicates the type of a PW:

  • 1: normal
  • 2: other

HWL2VpnStateChangeReason

Indicates the cause of the VC status change.

SysUpTime

Indicates the time for system startup.

TunnelPolicyName

Indicates the name of a tunnel policy.

Possible Causes

  • Cause 2:VC was created.
  • Cause 5:LDP session was Up.
  • Cause 11:New LDP mapping message was received.
  • Cause 18:Interface was Up.
  • Cause 23:Tunnel was Up.
  • Cause 30:LDP notification message was forwarded.
  • Cause 38:Local AC fault was resumed.
  • Cause 42:Local PSN fault was resumed.
  • Cause 59:MTU Matched.
  • Cause 62:VSI was resumed.
  • Cause 63:Set Admin VSI.
  • Cause 95:PW token exceed resume.
  • Cause 99:Related EVPN Inclusive Multicast route is invalid.

Procedure

  • If the possible causes are appeared, this trap message is informational only, and no action is required.
Parent Topic: L2VPN
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >