L2VPN/2/hwVplsVsiDown_clear

Message

L2VPN/2/hwVplsVsiDown_clear: The status of the VPLS VSI turned UP. (VsiName=[VsiName], InterfaceIndex=[InterfaceIndex], VsiId=[VsiId], HWL2VpnStateChangeReason=[HWL2VpnStateChangeReason], VsiStatus=[VsiStatus], InterfaceName=[InterfaceName])

Parameters

Parameter Name	Parameter Meaning
VsiName	Indicates the name of a VSI.
InterfaceIndex	Indicates the interface index.
VsiId	Indicates the ID of a VSI.
HWL2VpnStateChangeReason	Indicates the cause of the VSI status change.
VsiStatus	Indicates the status of the VSI: 1: VSI Up 2: VSI Down 3: VSI Admin down
InterfaceName	Indicates the interface name.

Possible Causes

Cause 2:VC was created.
Cause 5:LDP session was Up.
Cause 11:New LDP mapping message was received.
Cause 18:Interface was Up.
Cause 23:Tunnel was Up.
Cause 30:LDP notification message was forwarded.
Cause 38:Local AC fault was resumed.
Cause 42:Local PSN fault was resumed.
Cause 59:MTU Matched.
Cause 62:VSI was resumed.
Cause 63:Set Admin VSI.
Cause 95:AC Token exceed resume or PW Token exceed resume.
Cause 99:Related EVPN Inclusive Multicast route is invalid.

Procedure

If the possible causes are appeared, this trap message is informational only, and no action is required.