QOS/2/hwXQoSHardPipeAcBandWthOverAlarm_active

Message

QOS/2/hwXQoSHardPipeAcBandWthOverAlarm_active: The hard pipe configured on the interface [interface-name] over port bandwidth or port shaping.

This log is supported only on NetEngine 8000 F1A.

Description

The AC-side hard pipe bandwidth exceeded the interface bandwidth and became invalid.

Parameters

Parameter Name	Parameter Meaning
interface-name	Hardpipe interface name.

Possible Causes

The hard pipe configured on the interface exceeded port bandwidth or port shaping.

Procedure

1.Run the mpls l2vpn hard-pipe bandwidth bandwidth command in the interface view to decrease the user-side hard pipe bandwidth to a value lower than the interface bandwidth or port shaping value.

Check whether the alarm is cleared.

If yes, go to 3.
If no, go to 2.

2.Collect alarm information, log information and configuration information, and then contact technical support personnel.

3.End.