QOS/1/hwhqosBufferAlarm_active

Message

QOS/1/hwhqosBufferAlarm_active: The buffersize on slot [slot-id] chip [chip-id] has reached [buffer-size]%.

In VS mode, this log is supported only by the admin VS.

Description

A warning alarm is generated when the queue buffer usage reaches 90% of the threshold. An alarm is generated when the queue buffer usage reaches 98% of the threshold.

Parameters

Parameter Name	Parameter Meaning
slot-id	Slot ID.
chip-id	TM ID.
buffer-size	Queue buffer size.

Possible Causes

The buffersize was overloaded.

Procedure

1. Reduce the traffic volume. Then check whether the alarm is cleared.

If the alarm is cleared, go to Step 3.
If the alarm persists, go to Step 2.

2. Collect alarm information, log information and configuration information, and then contact technical support personnel.

3. End.