OSPF/2/ospfNbrStateChange_clear

Message

OSPF/2/ospfNbrStateChange_clear: The status of the non-virtual neighbor has changed. (RouterId=[RouterId], NbrIpAddress=[NbrIpAddress], NbrAddressLessIndex=[NbrAddressLessIndex], NbrRtrId=[NbrRtrId], NbrState=[NbrState], ProcessId=[ProcessId], AreaId=[AreaId], IfnetIndex=[IfnetIndex], LocalIfIpAddress=[LocalIfIpAddress], IfName=[IfName], VpnName=[VpnName], Reason=[NbrStateChangeReason], SubReason=[SubReason])

Parameters

Parameter Name	Parameter Meaning
RouterId	Indicates the router ID.
NbrIpAddress	Indicates the IP address of the neighbor.
NbrAddressLessIndex	Indicates the interface index.
NbrRtrId	Indicates the router ID of the neighbor.
NbrState	Indicates the neighbor status. The trap is a service restoration trap only when the value of Full. Otherwise, it is a fault trap. 1: Down. 2: Attempt. 3: Init. 4: 2-Way. 5: ExStart. 6: Exchange. 7: Loading. 8: Full.
ProcessId	Indicates the process ID.
AreaId	Indicates the area ID.
IfnetIndex	Indicates the physical interface index.
LocalIfIpAddress	Indicates the IP address of the local interface.
IfName	Indicates the physical interface name.
VpnName	Indicates the VPN name.
NbrStateChangeReason	Indicates the reason why the neighbor status changes. [1]Adjacency HoldTimer Expired. [2] Physical Interface State Change. [3] Protocol reason. [4] BFD session state change. [5] Configuration change. [6] Peer router reason. [7] Waiting for establishing neighbor. [99] Alarm clear. [101] Neighbor deleted. [102] Neighbor full. [103] Interface silent. [104] Interface deleted. [105] DR/BDR change.
SubReason	Indicates the detailed reason. [57] Neighbor deleted. [58] Neighbor full. [59] Interface silent. [60] Interface deleted. [61] DR/BDR change. [62] Configuration change.

Possible Causes

The status of the non-virtual neighbor has changed.

Procedure

If the possible causes are appeared, this trap message is informational only, and no action is required.