VRRP/4/vrrpNewMaster: The VRRP status changed to master. (ifIndex=[ifIndex], VrId=[VrId], MasterIPAddress=[MasterIPAddress], sysName=[sysName], ifName=[ifName], ChangeReason=[ChangeReason])
| Parameter Name | Parameter Meaning |
|---|---|
|
ifIndex |
Index of the interface where VRRP is configured |
|
VrId |
VRID of the VRRP backup group |
|
MasterIPAddress |
IP address of the master device in the VRRP backup group |
|
sysName |
System name |
|
ifName |
Name of the interface where VRRP is configured |
|
ChangeReason |
VRRP status change reason |
Cause 1:VRRP negotiation of the master device timed out due to a network fault.
Cause 2:The priority of the device in the VRRP backup group was changed using the vrrp vrid virtual-router-id priority priority-value command.
Cause 3:The virtual IP address of the VRRP backup group was changed using the vrrp vrid virtual-router-id [ virtual-ip virtual-address ] command.
Cause 4:An mVRRP backup group switchover occurred.
This log message is informational only, and no action is required.