A table of descriptive and status information about the MAC Control sublayer on the ethernet-like interfaces attached to a particular system. There will be one row in this table for each ethernet-like interface in the system which implements the MAC Control sublayer. If some, but not all, of the ethernet-like interfaces in the system implement the MAC Control sublayer, there will be fewer rows in this table than in the dot3StatsTable.
The index of the table is dot3StatsIndex.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.2.1.10.7.9.1.1 |
dot3ControlFunctionsSupported |
BITS{pause(0)} |
read-only |
A list of the possible MAC Control functions implemented for this interface. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.2.1.10.7.9.1.2 |
dot3ControlInUnknownOpcodes |
Counter32 |
read-only |
A count of MAC Control frames received on this interface that contain an opcode that is not supported by this device. For interfaces operating at 10 Gb/s, this counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCControlInUnknownOpcodes object for 10 Gb/s or faster interfaces. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.2.1.10.7.9.1.3 |
dot3HCControlInUnknownOpcodes |
Counter64 |
read-only |
A count of MAC Control frames received on this interface that contain an opcode that is not supported by this device. This counter is a 64 bit version of dot3ControlInUnknownOpcodes. It should be used on interfaces operating at 10 Gb/s or faster. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. |
This object is implemented as defined in the corresponding MIB files. |