The hwDomainTable is a domain information table used to complete basic configuration of a domain, including creating, deleting, modifying, and configuring the attributes of an authentication or accounting solution in a domain.
The index of the table is hwDomainName.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.4.1.2011.5.2.1.4.1.7 |
hwDomainIfSrcRoute |
INTEGER{true(1),false(2)} |
read-only |
The route of source interface. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.2.1.4.1.8 |
hwDomainNextHopIP |
IpAddress |
read-create |
The next hop of source IP address route. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.2.1.4.1.9 |
hwDomainIdleCutTime |
Integer32{(0,2880)} |
read-create |
The cut time of idle interval. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.2.1.4.1.10 |
hwDomainIdleCutFlow |
Integer32{(-1,76800000)} |
read-create |
The flow of idle interval, in Kbytes/min, 0 indicates idle-cut is not performed, -1 indicates idle-cut is performed with 0 idle-rate. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.2.1.4.1.12 |
hwDomainType |
INTEGER{normal(1),device(2)} |
read-create |
The domain type. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.2.1.4.1.14 |
hwDomainIdleCutType |
INTEGER{both(1),inbound(2),outbound(3)} |
read-write |
The type of idle-cut, default type is 1. |
The actually supported access is read-only. |