Configure the IP address of IP pool.
The indexes of the table are hwAclIPPoolIPPoolIndex, hwAclIPPoolIPIndex.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.4.1.2011.5.1.1.21.1.1 |
hwAclIPPoolIPPoolIndex |
Integer32 |
read-only |
This object indicates the level 1 index, that is, the index of an IP address pool used by an ACL. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.1.1.21.1.2 |
hwAclIPPoolIPIndex |
Integer32 |
read-only |
This object indicates the level 2 index, that is, the index of an IPv4 address in an IP address pool used by an ACL. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.1.1.21.1.3 |
hwAclIPPoolIPIpAdd |
IpAddress |
read-create |
The object indicates the IP-address. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.1.1.21.1.4 |
hwAclIPPoolIPIpWild |
IpAddress |
read-create |
The object indicates the IP-address wild. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.1.1.21.1.5 |
hwAclIPPoolIPRowStatus |
INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)} |
read-create |
Row status. |
The actually supported access is read-only. |