hwBfdSessionTable

1.3.6.1.4.1.2011.5.25.38.2.3.1.1

hwBfdSessIndex

Unsigned32{(1,4294967295)}

accessible-for-notify

Equal to local discriminator in

1.3.6.1.4.1.2011.5.25.38.2.3.1.2

hwBfdSessMIndex

Unsigned32{(1,4294967295)}

read-only

Equal to 0xFFFFFFFF

1.3.6.1.4.1.2011.5.25.38.2.3.1.4

hwBfdSessCfgName

OCTET STRING{(1,64)}

read-only

This object indicates the name of a BFD session. Currently, this object is used only as the VB binding variable for alarms.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.38.2.3.1.5

hwBfdSessPeerAddr

IpAddress

read-only

This object indicates the destination IP address of a BFD session. Currently, this object is used only as the VB binding variable of the alarm.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.38.2.3.1.6

hwBfdSessBindIfIndex

Integer32{(0,2147483647)}

read-only

This object indicates the index of the interface bound to a BFD session. Currently, this object is used only as the VB binding variable for alarms.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.38.2.3.1.7

hwBfdSessBindIfName

OCTET STRING{(0,64)}

read-only

This object indicates the name of the interface bound to a BFD session. Currently, this object is used only as the VB binding variable for alarms.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.38.2.3.1.8

hwBfdSessLocalDiscr

Unsigned32{(0,4294967295)}

read-only

This object indicates the local descriptor of a BFD session. Currently, this object is used only as the VB binding variable for alarms.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.38.2.3.1.9

hwBfdSessRemoteDiscr

Unsigned32{(0,4294967295)}

read-only

This object indicates the remote descriptor of a BFD session. Currently, this object is used only as the VB binding variable for alarms.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.38.2.3.1.10

hwBfdSessOperMode

Integer32{(0,6)}

read-only

Describe the current operating mode configured with the BFD session.

The value is an enumerated type and case sensitive, which can be:

1. 0 -asynchronous mode with echo function

2. 1 -asynchronous mode without echo function

3. 2 -demand mode with echo function

4. 3 -demand mode without echo function

5. 4 -asynchronous One-arm-echo mode

6. 5 -seamless BFD without echo function

7. 6 -asynchronous unaffiliated mode

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.38.2.3.1.11

hwBfdSessDetectMult

Unsigned32{(3,50)}

read-only

Detect time multiplier. The negotiated transmit interval,

multiplied by this value, provides the detection time for

the transmitting system in Asynchronous mode.

Default: 3

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.38.2.3.1.13

hwBfdSessActualRxInterval

Integer32

read-only

This is the minimum interval, in milliseconds, between

received BFD Control packets that this system is capable

of supporting.

Unit: millisecond

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.38.2.3.1.14

hwBfdSessActualTxInterval

Integer32

read-only

This is the minimum interval, in milliseconds, that the

local system would like to use when transmitting BFD

Control packets.

Unit: millisecond

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.38.2.3.1.15

hwBfdSessWTRInterval

Integer32{(0,60)}

read-only

The WTR interval of the BFD session.

Unit: minute

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.38.2.3.1.16

hwBfdSessTOS

Integer32{(0,7)}

read-only

This is the TOS value of bfd packet.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.38.2.3.1.17

hwBfdSessState

Integer32{(0,3)}

read-only

Describe the current state of the BFD session.

The value is an enumerated type and case sensitive, which can be:

1. 0 -admin down

2. 1 -down

3. 2 -init

4. 3 -up

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.38.2.3.1.18

hwBfdSessDiag

Integer32{(0,31)}

read-only

A diagnostic code specifying the local system's reason for

the last session state change.

The value is an enumerated type and case sensitive, which can be:

1. 0 -no diagnostic

2. 1 -control detection time expired

3. 2 -echo function failed

4. 3 -neighbor signaled session down

5. 4 -forwarding plane reset

6. 5 -path down

7. 6 -concatenated path down

8. 7 -administratively down

9. 8 -reverse concatenated path down

10. 9 -neighbor signaled session down (receive admindown)

11. 10-31 -reserved for future use

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.38.2.3.1.19

hwBfdSessSourceAddr

IpAddress

read-only

The source address of the session.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.38.2.3.1.20

hwBfdSessVrfIndex

Unsigned32{(0,4294967295)}

read-only

The index of the VPN interface.

The actually supported access is accessible-for-notify.

1.3.6.1.4.1.2011.5.25.38.2.3.1.21

hwBfdSessVPNName

OCTET STRING{(1,31)}

read-only

The name of VPN interface.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.38.2.3.1.22

hwBfdSessType

INTEGER{static(1),dynamic(2),entireDynamic(3),auto(4)}

read-only

The type of the BFD session.

The value is an enumerated type and case sensitive, which can be:

1. static(1) -static

2. dynamic(2) -dynamic

3. entireDynamic(3) -entire dynamic

4. auto(4) -auto

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.38.2.3.1.24

hwBfdSessDefaultIp

INTEGER{no(1),yes(2)}

read-only

BFD session use default multicast IP as the detect peer-ip

The value is an enumerated type and case sensitive, which can be:

1. no(1) -do not use the default multicast IP

2. yes(2) -use the default multicast IP

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.38.2.3.1.25

hwBfdSessPISFlag

INTEGER{false(1),true(2),subif(3)}

read-only

The state of BFD session is associated with the state of the binding interface

The value is an enumerated type and case sensitive, which can be:

1. false(1) -do not associate with interface state

2. true(2) -associate with interface state

3. subif(3) -associate with interface and correlative sub interface

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.38.2.3.1.26

hwBfdSessBindType

INTEGER{interfaceIp(1),peerIp(2),sourceIp(3),ifAndSourceIp(4),fec(5),tunnelIf(6),ospf(7),isis(8),ldpLsp(9),staticLsp(10),teLsp(11),teTunnel(12),pw(13),vsiPw(15),ldpTunnel(21),bgpTunnel(22)}

read-only

The binding type of the BFD session.

The value is an enumerated type and case sensitive, which can be:

1. interfaceIp(1) -BFD for IP with peer-ip and interface

2. peerIp(2) -BFD for IP only with peer-ip

3. sourceIp(3) -BFD for IP with peer-ip and source-ip

4. ifAndSourceIp(4) -BFD for IP with peer-ip, interface and source-ip

5. fec(5) -BFD for FEC(NOT support now)

6. tunnelIf(6) -BFD for Tunnel interface(NOT support now)

7. ospf(7) -BFD for OSPF

8. isis(8) -BFD for ISIS

9. ldpLsp(9) -BFD for LDP-LSP

10. staticLsp(10) -BFD for static LSP

11. teLsp(11) -BFD for TE-LSP

12. teTunnel(12) -BFD for TE-Tunnel

13. pw(13) -BFD for PW;

14. vsiPw(15) -BFD for VSI PW

15. ldpTunnel(21) -BFD for LDP-Tunnel

16. bgpTunnel(22) -BFD for BGP-Tunnel

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.38.2.3.1.27

hwBfdSessNextHop

IpAddress

read-only

It is the next hop of the BFD session.

The actually supported access is accessible-for-notify.

1.3.6.1.4.1.2011.5.25.38.2.3.1.28

hwBfdSessStaticLspName

OCTET STRING{(0,20)}

read-only

It is the static LSP name of the BFD session.

The actually supported access is accessible-for-notify.

1.3.6.1.4.1.2011.5.25.38.2.3.1.30

hwBfdSessPWSecondaryFlag

INTEGER{flagMasterPW(1),flagSecondaryPW(2),flagNoPW(3)}

read-only

The role of the PW bound with BFD session.

The value is an enumerated type and case sensitive, which can be:

1. flagMasterPW(1) -master PW

2. flagSecondaryPW(2) -secondary PW

3. flagNoPW(3) -no PW

Default: 1

The actually supported access is accessible-for-notify.

1.3.6.1.4.1.2011.5.25.38.2.3.1.32

hwBfdSessVcId

Unsigned32{(0,4294967295)}

read-only

It is the ID of VC.

The actually supported access is accessible-for-notify.

1.3.6.1.4.1.2011.5.25.38.2.3.1.33

hwBfdSessVsiName

OCTET STRING{(0,31)}

read-only

It is the name of VSI.

The actually supported access is accessible-for-notify.

1.3.6.1.4.1.2011.5.25.38.2.3.1.34

hwBfdSessVsiPeerAddr

IpAddress

read-only

It is the peer-ip of VSI.

The actually supported access is accessible-for-notify.

1.3.6.1.4.1.2011.5.25.38.2.3.1.35

hwBfdSessDiscrAuto

INTEGER{enabled(1),disabled(2)}

read-only

Describe whether the discriminator can be auto allocated.

The value is an enumerated type and case sensitive, which can be:

1. enabled(1) -the discriminator can be allocated automatically

2. disabled(2) -the discriminator cannot be allocated automatically

Default: disabled

The actually supported access is accessible-for-notify.

1.3.6.1.4.1.2011.5.25.38.2.3.1.36

hwBfdSessPeerIpv6Addr

OCTET STRING{(16,16)}

read-only

Define the peer IPv6 address of the BFD session.

The actually supported access is accessible-for-notify.

1.3.6.1.4.1.2011.5.25.38.2.3.1.37

hwBfdSessSourceIpv6Addr

OCTET STRING{(16,16)}

read-only

Define the source IPv6 address of the BFD session.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.38.2.3.1.38

hwBfdSessIpv6NextHop

OCTET STRING{(16,16)}

read-only

It is the next hop of the BFD session.

The actually supported access is accessible-for-notify.

1.3.6.1.4.1.2011.5.25.38.2.3.1.39

hwBfdSessIsIPv6Addr

INTEGER{true(1),false(2)}

read-only

Whether the peer address of the BFD session is IPv6 address.

Default: false

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.38.2.3.1.43

hwBfdSessOneArmEcho

INTEGER{enabled(1),disabled(2)}

read-only

The value of this object identifies whether a session works in one-arm-echo mode.

The value is an enumerated type and case sensitive, which can be:

1. enabled(1) -indicates that the session works in one-arm-echo mode

2. disabled(2) -indicates that the session does not work in one-arm-echo mode

Default: disabled

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.38.2.3.1.48

hwBfdSessSelectBoard

OCTET STRING{(1,47)}

read-only

This object indicates the main processing board of a BFD session.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.38.2.3.1.56

hwBfdSessPeerInetAddr

OCTET STRING{(0,255)}

read-only

The value of this object identifies the destination IP address of the BFD session.

The actually supported access is accessible-for-notify.

1.3.6.1.4.1.2011.5.25.38.2.3.1.59

hwBfdSessBindAppTypeMask

OCTET STRING

read-only

A value which indicates the set of applications that

this BFD session binds. Every bit indicates a application.

The corresponding bit and applications are as follows:

bit application

0 IFNET

1 Route-Management

2 OSPF

3 ISISL1

4 ISISL2

5 PIM

6 ISISL1L2

7 BGP

8 VRRP

9 LSPM

10 RSVP

11 LDP

12 TE

13 Product Private APP

14 L2VPN

15 OAM_MANAGER

16 VTE

17 VPW

18 MPLSFW

19 VGMP

20 LSPV

21 VSI_PW

22 ETHOAM

23 AUTO

24 E-TRUNK

25 OSPFv3

26 ISISL1_6

27 ISISL2_6

28 PIM6

29 ISISL1L2_6

30 BGP6

31 RM6

32 RBS

33 RIP

34 FRP

35 BGPLSP

36 STATICRTV6

37 STATICRT

38 VRRP6

39 PIMV6

40 ADM

41 BFD

42 GFD

43 SOCK

44 FES

45 DGNTL

46 BR_V5ADA

47 VSM

48 SEGR

49 LABELV4

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.38.2.3.1.62

hwBfdSessDescription

OCTET STRING{(1,64)}

read-only

Description about a BFD session.

The actually supported access is accessible-for-notify.

1.3.6.1.4.1.2011.5.25.38.2.3.1.63

hwBfdSessFeNodeID

Unsigned32{(0,4294967295)}

read-only

ID of the board where the session resides.

The actually supported access is accessible-for-notify.

1.3.6.1.4.1.2011.5.25.38.2.3.1.64

hwBfdSessLinkType

OCTET STRING{(1,31)}

read-only

Session type.

The actually supported access is accessible-for-notify.

1.3.6.1.4.1.2011.5.25.38.2.3.1.65

hwBfdSessTunnelName

OCTET STRING{(1,64)}

read-only

Tunnel name.

The actually supported access is accessible-for-notify.

1.3.6.1.4.1.2011.5.25.38.2.3.1.66

hwBfdSessDownReason

OCTET STRING{(1,63)}

read-only

Reason why the session goes down.

The actually supported access is accessible-for-notify.