This table is used to configure and initiate a CE ping test. The test starts when the table is created.
The index of the table is hwCePingIndex.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.4.1.2011.5.25.175.1.1.1 |
hwCePingIndex |
Integer32{(1,255)} |
not-accessible |
The index of hwCePingTable,it is always 1. |
Currently, it is always 1. |
|
1.3.6.1.4.1.2011.5.25.175.1.1.2 |
hwCePingTargetAddress |
IpAddress |
read-create |
Specifies the IP address to be used as the destination. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.175.1.1.3 |
hwCePingSourceAddress |
IpAddress |
read-create |
Specify an unused IP address in the same network that is associated with the VPLS. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.175.1.1.4 |
hwCePingVsiName |
OCTET STRING{(1,31)} |
read-create |
The VSI name that is uesd by the operation. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.175.1.1.5 |
hwCePingInterval |
Integer32{(1,10)} |
read-create |
This value represents the inter-packet delay between packets and is in seconds. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.175.1.1.6 |
hwCePingCount |
Integer32{(1,255)} |
read-create |
The value of this object specifies the number of packets sent for one probe. The value ranges from 1 to 255. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.175.1.1.7 |
hwCePingTtl |
Unsigned32{(1,255)} |
read-create |
This object indicates the TTL of echo request packets. Default value is 255. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.175.1.1.8 |
hwCePingExp |
Unsigned32{(0,7)} |
read-create |
This object indicates the EXP of echo request packets. Default value is 0. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.175.1.1.9 |
hwCePingVerbose |
INTEGER{no(0),yes(1)} |
read-create |
The value of this object identifies whether the detailed information about the remote PE can be displayed. The default value is 0. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.175.1.1.10 |
hwCePingMacAddress |
OCTET STRING{(6,6)} |
read-create |
Special MAC address for CE-PING, ranging from E024-7FA4-D2CB to E024-7FA4-D2DA. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.175.1.1.51 |
hwCePingRowStatus |
INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)} |
read-create |
The operating state of the row. |
This object is implemented as defined in the corresponding MIB files. |