The clock source config table.
the clock source configuration table.
The indexes of the table are hwClockSrcCfgChassisIndex, hwClockSrcCfgSourceTypeIndex, hwClockSrcCfgSourceIndex.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.4.1.2011.5.25.186.1.11.1.1 |
hwClockSrcCfgChassisIndex |
Integer32{(1,2147483647)} |
not-accessible |
The chassis index. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.186.1.11.1.2 |
hwClockSrcCfgSourceTypeIndex |
INTEGER{bits(1),ptp(2),interface(3),cesacr(4)} |
accessible-for-notify |
The type of clock source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.186.1.11.1.3 |
hwClockSrcCfgSourceIndex |
Integer32 |
not-accessible |
The index of clock source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.186.1.11.1.4 |
hwClockSrcCfgSourceDescr |
OCTET STRING |
read-only |
The description of clock source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.186.1.11.1.5 |
hwClockSrcCfgClkEnable |
INTEGER{enabled(1),disabled(2)} |
read-create |
The enable flag of clock source. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.11.1.6 |
hwClockSrcCfgSystemPriority |
Integer32{(0,255)} |
read-create |
The priority of system clock source. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.11.1.7 |
hwClockSrcCfg2M1Priority |
Integer32{(0,255)} |
read-create |
The priority of 2msync-1 clock source. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.11.1.8 |
hwClockSrcCfg2M2Priority |
Integer32{(0,255)} |
read-create |
The priority of 2msync-2 clock source. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.11.1.9 |
hwClockSrcCfgSourceSsm |
INTEGER{unk(0),prc(2),ssua(4),ssub(8),sec(11),dnu(15),unknown(16),prtc(8194),eprtc(8450),esec(8715),eprc(8962)} |
read-create |
The SSM quality of clock source. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.11.1.10 |
hwClockSrcCfgSsmSetMode |
INTEGER{manual(1),auto(2)} |
read-only |
The set mode of SSM. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.186.1.11.1.11 |
hwClockSrcCfgSourceState |
INTEGER{initial(0),normal(1),abnormal(2),waitwtr(3),holdoff(4)} |
read-only |
The state of clock source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.186.1.11.1.12 |
hwClockSrcCfgFreqCheckResult |
INTEGER{abnormal(0),normal(1)} |
read-only |
The result of frequency check. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.186.1.11.1.15 |
hwClockSrcCfgSabit |
INTEGER{sa4(4),sa5(5),sa6(6),sa7(7),sa8(8),invalid(99)} |
read-write |
The SA bit of E1 Port SSM information. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.11.1.16 |
hwClockSrcCfgClockId |
Integer32{(0,15)} |
read-write |
The clockid of clock source. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.11.1.17 |
hwClockSrcCfgClockIdSetMode |
INTEGER{manual(1),auto(2)} |
read-only |
The set mode of clockid. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.186.1.11.1.18 |
hwClockSrcCfgOutSsm |
INTEGER{unk(0),prc(2),ssua(4),ssub(8),sec(11),dnu(15),unknown(16),invalid(99),prtc(8194),eprtc(8450),esec(8715),eprc(8962)} |
read-only |
Current output ssm. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.186.1.11.1.19 |
hwClockSrcCfgOutClockId |
INTEGER{clockid0(0),clockid1(1),clockid2(2),clockid3(3),clockid4(4),clockid5(5),clockid6(6),clockid7(7),clockid8(8),clockid9(9),clockid10(10),clockid11(11),clockid12(12),clockid13(13),clockid14(14),clockid15(15),notsupport(99)} |
read-only |
Current output clockid. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.186.1.11.1.20 |
hwClockSrcCfgRowStatus |
INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)} |
read-create |
The row status. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.11.1.21 |
hwClockSrcCfgFreqDeviation |
OCTET STRING |
read-only |
Freqdeviation value of clock source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.186.1.11.1.22 |
hwClockSrcCfgPhyState |
INTEGER{cardTypeNotSupport(0),slave(1),master(2),speedNotSupport(3),portDown(4)} |
read-only |
The PHY clock state of ports. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.186.1.11.1.23 |
hwClockSrcCfgNegotiationSlave |
INTEGER{notSupport(0),enable(1),disable(2)} |
read-create |
Set PHY clock state to slave. |
The actually supported access is read-only. |