The clock Attribute table.
The clock source attribute table.
The index of the table is hwClockAttributeChassisIndex.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.4.1.2011.5.25.186.1.9.1.1 |
hwClockAttributeChassisIndex |
Integer32{(1,2147483647)} |
not-accessible |
The chassis index. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.186.1.9.1.2 |
hwClockAttributeSysClkRunMode |
INTEGER{normal(0),freeRun(1),hold(2)} |
read-write |
The run mode of system clock. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.9.1.3 |
hwClockAttributeSsmControl |
INTEGER{on(0),off(1)} |
read-write |
The flag whether SSM is concerned with the clock source selection. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.9.1.4 |
hwClockAttributeFreqCheckEnable |
INTEGER{enabled(1),disabled(2)} |
read-write |
The enable flag of frequency check. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.9.1.5 |
hwClockAttributeRetrieveMode |
INTEGER{retrieve(0),noRetrieve(1)} |
read-write |
The retrieve mode of system clock. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.9.1.6 |
hwClockAttributeWtrTime |
Integer32{(0,12)} |
read-write |
The time waiting for retrieve. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.9.1.7 |
hwClockAttributeHoldOffTime |
Integer32{(300,1800)} |
read-write |
The holdoff-time when the system source is lost. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.9.1.8 |
hwClockAttributeOutThreshold |
INTEGER{prc(2),ssua(4),ssub(8),sec(11),dnu(15)} |
read-write |
The Threshold of out put. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.9.1.9 |
hwClockAttributeSysMaxOutSsm |
INTEGER{unk(0),prc(2),ssua(4),ssub(8),sec(11),prtc(8194),eprtc(8450),esec(8715),eprc(8962)} |
read-write |
The max ssm of system out put. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.9.1.10 |
hwClockAttribute2M1MaxOutSsm |
INTEGER{unk(0),prc(2),ssua(4),ssub(8),sec(11)} |
read-write |
The max ssm of 2msync-1 out put. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.9.1.11 |
hwClockAttribute2M2MaxOutSsm |
INTEGER{unk(0),prc(2),ssua(4),ssub(8),sec(11)} |
read-write |
The max ssm of 2msync-2 out put. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.9.1.12 |
hwClockAttributeSysClkLockMode |
INTEGER{freeRun(0),fastLock(1),lock(2),hold(3),freeRunJudge(16),holdJudge(19)} |
read-only |
The Lock mode of system clock. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.186.1.9.1.13 |
hwClockAttributeExtendSsmControl |
INTEGER{on(0),off(1)} |
read-write |
The flag whether Extend SSM is concerned with the clock source selection. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.9.1.14 |
hwClockAttributeInternalClockId |
Integer32{(0,15)} |
read-write |
The internal clockid of the device. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.9.1.15 |
hwClockAttributeTodProtocol |
INTEGER{nmea(1),ubx(2),none(3),ccsa(4),ccsaopt2(5),g8271(6)} |
read-write |
1pps bits tod protocol. |
The actually supported access is read-only. |