hwEntityStateTable

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.1

hwEntityAdminStatus

INTEGER{notSupported(1),locked(2),shuttingDown(3),unlocked(4),up(11),down(12),loopback(13)}

read-write

This object indicates the entity management status.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.2

hwEntityOperStatus

INTEGER{notSupported(1),disabled(2),enabled(3),offline(4),up(11),down(12),connect(13),protocolUp(15),linkUp(16),linkDown(17),present(18),absent(19)}

read-only

This object indicates the entity operation status.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.3

hwEntityStandbyStatus

INTEGER{notSupported(1),hotStandby(2),coldStandby(3),providingService(4)}

read-only

This object indicates the entity backup status.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.4

hwEntityAlarmLight

BITS{notSupported(0),underRepair(1),critical(2),major(3),minor(4),alarmOutstanding(5),warning(6),indeterminate(7)}

read-only

This object indicates the entity alarm status, which is consistent with the entity alarm indicator status.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.5

hwEntityCpuUsage

Integer32{(0,100)}

read-only

This object indicates the CPU usage of an entity. Generally, the overall CPU usage of the entity is calculated, without considering the number of CPUs on the entity.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.6

hwEntityCpuUsageThreshold

Integer32{(0,100)}

read-write

This object indicates the CPU usage threshold. When the CPU usage exceeds the threshold, a notification is sent.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.7

hwEntityMemUsage

Integer32{(0,100)}

read-only

This object indicates the memory usage of an entity, that is, the percentage of the memory that has been used.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.8

hwEntityMemUsageThreshold

Integer32{(0,100)}

read-write

This object indicates the memory usage threshold. When the memory usage exceeds the threshold, a notification is sent.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.9

hwEntityMemSize

Integer32

read-only

It is recommended that the hwEntityMemSizeMega object be used if the memory size exceeds 2 GB.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.10

hwEntityUpTime

Integer32

read-only

This object indicates the total duration when an entity is in the UP state.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.11

hwEntityTemperature

Integer32

read-only

This object indicates the entity temperature. Unit: centigrade

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.12

hwEntityTemperatureThreshold

Integer32

read-write

This object indicates the upper threshold of the entity temperature. Unit: centigrade

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.13

hwEntityVoltage

Integer32

read-only

This object indicates the entity voltage. Unit: mV

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.14

hwEntityVoltageLowThreshold

Integer32

read-write

This object indicates the minimum entity voltage threshold. Unit: mV

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.15

hwEntityVoltageHighThreshold

Integer32

read-write

This object indicates the maximum entity voltage threshold. Unit: mV

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.16

hwEntityTemperatureLowThreshold

Integer32

read-write

This object indicates the lower entity temperature threshold. Unit: centigrade

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.17

hwEntityOpticalPower

Integer32

read-only

This object indicates the optical module's optical power.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.18

hwEntityCurrent

Integer32

read-only

This object indicates the entity current.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.19

hwEntityMemSizeMega

Integer32

read-only

This object indicates the size of the entity SDRAM.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.20

hwEntityPortType

INTEGER{notSupported(1),copper(2),fiber100(3),fiber1000(4),fiber10000(5),opticalnotExist(6),optical(7),fiber25000(8),fiber50000(9),fiber100000(10),fiber200000(11),fiber400000(12),fiber40000(13)}

read-only

This object indicates the port type.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.21

hwEntityDuplex

INTEGER{notSupported(1),full(2),half(3)}

read-only

This object indicates the duplex mode of a port.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.22

hwEntityOpticalPowerRx

Integer32

read-only

This object indicates the receive power of an optical module.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.23

hwEntityCpuUsageLowThreshold

Integer32{(0,100)}

read-write

This object indicates the CPU usage threshold of an entity.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.24

hwEntityBoardPower

Integer32

read-only

The value 0 indicates an invalid value and the node cannot be queried.

The query result is the Current-Power.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.26

hwEntitySupportFlexCard

INTEGER{notSupported(1),flexible(2),unflexible(3),dummy(4)}

read-only

It describes whether the whole board supports flexible cards.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.27

hwEntityBoardClass

INTEGER{notSupported(1),mpu(2),lpu(3),sfu(4),icu(5),ecu(6),fan(7),power(8),lcd(9),pmu(10),cmu(11)}

read-only

This object indicates the board type.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.30

hwEntityCPUType

OCTET STRING{(0,255)}

read-only

This object indicates the CPU type.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.31

hwEntityMemoryType

OCTET STRING{(0,255)}

read-only

This object indicates the memory type.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.32

hwEntityFlashSize

Integer32

read-only

This object indicates the flash size of an entity.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.33

hwEntityIfUpTimes

Integer32

read-only

Times that the interface goes Up.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.34

hwEntityIfDownTimes

Integer32

read-only

Times that the interface goes Down.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.35

hwEntityCPUAvgUsage

Integer32

read-only

This object indicates the average CPU usage.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.36

hwEntityMemoryAvgUsage

Integer32{(0,100)}

read-only

This object indicates the average memory usage.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.46

hwEntityStartMode

INTEGER{notSupported(1),cold(2),warm(3),unknown(4)}

read-only

This object indicates the board startup mode.

This object is implemented as defined in the corresponding MIB files.