This table describes the ERPS ring configurations.
The index of the table is hwConfigRingId.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.4.1.2011.5.25.256.1.2.1.1 |
hwConfigRingId |
Integer32{(1,255)} |
accessible-for-notify |
This object indicates the ring ID. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.256.1.2.1.3 |
hwConfigDescription |
OCTET STRING{(0,80)} |
read-create |
This object indicates the ring description. The description can contain a maximum of 80 ASCII characters. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.256.1.2.1.4 |
hwConfigControlVlanId |
Integer32{(0,0),(1,4094)} |
read-create |
This object indicates the control VLAN information of the ring. If the value of this object is set to 0, the configuration is deleted. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.256.1.2.1.5 |
hwConfigProtectedInstanceList |
OCTET STRING{(0,512)} |
read-create |
This object indicates the protection instance ID of the ring. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.256.1.2.1.6 |
hwConfigWtrTimerSettingValue |
Integer32{(1,12)} |
read-create |
This object indicates the ring switchover protection time. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.256.1.2.1.7 |
hwConfigGuardTimerSettingValue |
Integer32{(1,200)} |
read-create |
This object indicates the interval for discarding RAPS packets. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.256.1.2.1.8 |
hwConfigHoldoffTimerSettingValue |
Integer32{(0,100)} |
read-create |
This object indicates the interval for keeping the interface status. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.256.1.2.1.9 |
hwConfigResetRapsPktCnt |
INTEGER{clear(1),unused(65535)} |
read-create |
This object indicates resetting packet statistics on an interface. When the read operation is performed, the system returns 65535 (not used). When the set operation is performed, the value of this object must be set to 1 (cleared). |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.256.1.2.1.10 |
hwConfigRapsMel |
Integer32{(0,7)} |
read-create |
This object indicates the maintenance entity level of the ring, providing a channel to read the ring RAPS information. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.256.1.2.1.11 |
hwConfigVersion |
INTEGER{v1(1),v2(2)} |
read-create |
This object indicates the version information of the ring. The default version is V1. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.256.1.2.1.12 |
hwConfigRevertiveMode |
INTEGER{revertive(1),nonRevertive(2)} |
read-create |
This object indicates the ring's switchback mode. The default mode is revertive switching. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.256.1.2.1.13 |
hwConfigRingRole |
INTEGER{majorRing(1),subRing(2)} |
read-create |
This object indicates that the ring is configured as a sub-ring. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.256.1.2.1.14 |
hwConfigRapsChannelMode |
INTEGER{virtualChannel(1),nonVirtualChannel(2),unused(65535)} |
read-create |
This object indicates the sub-ring channel mode. By default, a non-virtual channel is used. If the ring is the primary ring, the system returns 65535 (not used) after the read operation is performed. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.256.1.2.1.15 |
hwConfigTcNotifyErpsRing |
OCTET STRING{(0,32)} |
read-create |
This object indicates the list of rings to be informed when the topology changes. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.256.1.2.1.16 |
hwConfigTcProtectionInterval |
Integer32{(1,600)} |
read-create |
This object indicates the notification interval when the ring topology changes. The default value is 2s. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.256.1.2.1.17 |
hwConfigTcProtectionThreshold |
Integer32{(1,255)} |
read-create |
This object indicates the notification threshold when the ring topology changes. The default value is 3. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.256.1.2.1.18 |
hwConfigProtectionSwitch |
INTEGER{clear(1),idle(65535)} |
read-create |
This object indicates canceling the ring configuration. The value is 65535 by default. When the ring configuration is canceled, the value is 1 (cleared). |
The actually supported access is read-only. |