hwhqosIfStatExtTable

This table is used to display the statistics of user queue.

The indexes of the table are hwhqosIfExtIndex, hwhqosExtDirection, hwhqosExtUserLayer1, hwhqosExtUserLayer2, hwhqosQueueExtIndex.

OID

Object

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.132.1.77.1.1

hwhqosIfExtIndex

Integer32{(0,2147483647)}

not-accessible

This object indicates the interface index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.132.1.77.1.2

hwhqosExtDirection

INTEGER{inbound(1),outbound(2),absent(255)}

not-accessible

The value of this object identifies the incoming and outgoing directions. The object can be set to 0 when the direction is not specified.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.132.1.77.1.3

hwhqosExtUserLayer1

Integer32{(0,2147483647)}

not-accessible

This object indicates the outer user group ID.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.132.1.77.1.4

hwhqosExtUserLayer2

Integer32{(0,2147483647)}

not-accessible

The value of this object identifies the outer identifier of a user.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.132.1.77.1.5

hwhqosQueueExtIndex

Integer32{(0,2147483647)}

not-accessible

This object indicates the queue index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.132.1.77.1.6

hwhqosQueueExtForwardPacketsLow

Unsigned32

read-only

The value of this object identifies the packets forwarded in the queue. If this object is not supported, fill 0.which is lower 32 bits of the total number.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.132.1.77.1.7

hwhqosQueueExtForwardPacketsHigh

Unsigned32

read-only

The value of this object identifies the packets forwarded in the queue. If this object is not supported, fill 0.which is upper 32 bits of the total number.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.132.1.77.1.8

hwhqosQueueExtForwardBytesLow

Unsigned32

read-only

This object indicates the number of forwarded queue bytes.which is lower 32 bits of the total number.which is lower 32 bits of the total number.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.132.1.77.1.9

hwhqosQueueExtForwardBytesHigh

Unsigned32

read-only

This object indicates the number of forwarded queue bytes.which is upper 32 bits of the total number.which is upper 32 bits of the total number.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.132.1.77.1.10

hwhqosQueueExtDropPacketsLow

Unsigned32

read-only

This object indicates the number of packets discarded from the queue. If this object is not supported, fill 0.which is lower 32 bits of the total number.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.132.1.77.1.11

hwhqosQueueExtDropPacketsHigh

Unsigned32

read-only

This object indicates the number of packets discarded from the queue. If this object is not supported, fill 0.which is upper 32 bits of the total number.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.132.1.77.1.12

hwhqosQueueExtDropBytesLow

Unsigned32

read-only

This object indicates the number of bytes discarded from the queue. If this object is not supported, fill 0.which is lower 32 bits of the total number.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.132.1.77.1.13

hwhqosQueueExtDropBytesHigh

Unsigned32

read-only

This object indicates the number of bytes discarded from the queue. If this object is not supported, fill 0.which is upper 32 bits of the total number.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.132.1.77.1.18

hwhqosExtSetZero

INTEGER{setZero(1)}

read-write

This object indicates that the statistics are cleared.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.132.1.77.1.19

hwhqosQueueExtForwardPacketRateLow

Unsigned32

read-only

This object indicates the queue packet forwarding rate, in pps.which is lower 32 bits of the total number.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.132.1.77.1.20

hwhqosQueueExtForwardPacketRateHigh

Unsigned32

read-only

This object indicates the queue packet forwarding rate, in pps.which is upper 32 bits of the total number.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.132.1.77.1.21

hwhqosQueueExtForwardByteRateLow

Unsigned32

read-only

This object indicates the queue byte forwarding rate, in Bps.which is lower 32 bits of the total number.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.132.1.77.1.22

hwhqosQueueExtForwardByteRateHigh

Unsigned32

read-only

This object indicates the queue byte forwarding rate, in Bps.which is upper 32 bits of the total number.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.132.1.77.1.23

hwhqosQueueExtDropPacketRateLow

Unsigned32

read-only

This object indicates the queue packet discarding rate, in pps.which is lower 32 bits of the total number.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.132.1.77.1.24

hwhqosQueueExtDropPacketRateHigh

Unsigned32

read-only

This object indicates the queue packet discarding rate, in pps.which is upper 32 bits of the total number.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.132.1.77.1.25

hwhqosQueueExtDropByteRateLow

Unsigned32

read-only

This object indicates the queue byte discarding rate, in Bps.which is lower 32 bits of the total number.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.132.1.77.1.26

hwhqosQueueExtDropByteRateHigh

Unsigned32

read-only

This object indicates the queue byte discarding rate, in Bps.which is upper 32 bits of the total number.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

This table supports modification of only hwhqosSetZero.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

QoS MIB statistics are monitored in real time. It is recommended that the monitoring period be greater than or equal to 1 minute. If the monitoring period is less than 1 minute, the monitoring waveform may be unstable. The possible causes are as follows:

1. When the NMS calculates the collection rate, the collection count is obtained from the device. The collection time difference is calculated based on the time when the NMS receives packets. When the device or network is heavily loaded, the difference between the time difference collected on the device side and the time difference calculated on the NMS is large. The shorter the collection period, the larger the difference. Therefore, it is recommended that the collection period be greater than or equal to 1 minute.

2. To reduce the impact of performance data procession on device CPU, the device returns data saved using software when the NMS-side performance data procession is implemented (hardware data is periodically recorded into software on the device side).

Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >