hwIPAddressStatusTable
This Table is supported only on the NetEngine 8000 F1A.
Address status table.
It supports the query and setting of status of the local address pool. It does not support the query and setting of status of the remote address pool for the following reasons:
1. The status of the remote address pool cannot be set.
2. The remote and local address pools map different status tables, with different indexes.
3. The remote address pool is managed by the remote equipment, rather than the local equipment. The local equipment displays only the approximate status of the remote address pool.
The indexes of the table are hwIPPoolIndex, hwIPSectionIndex, hwIPAddress.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.4.1.2011.6.8.1.4.1.1 |
hwIPAddress |
IpAddress |
read-only |
IP address. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.6.8.1.4.1.2 |
hwIPAddressStatus |
INTEGER{idle(0),occupied(1),prohibitive(2),conflictive(3)} |
read-write |
Status of the address. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.6.8.1.4.1.3 |
hwPoolName |
OCTET STRING{(1,128)} |
read-only |
IP address pool name. |
This object is implemented as defined in the corresponding MIB files. |
Creation Restriction
No entry can be created in this table.Modification Restriction
Only addresses that are in the idle can be marked as disable and conflic.
The address cannot be set to the used state through the network management.
The address can be changed from the disable state to the idle state only when it is not used by the static user.