This table is the interface configuration table used by L2VPN. Users can read interface by it.
The index of the table is hwL2vpnAcIfIndex.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.4.1.2011.5.25.119.8.16.1.1 |
hwL2vpnAcIfIndex |
Integer32{(0,2147483647)} |
read-only |
A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. |
The actually supported access is accessible-for-notify. |
|
1.3.6.1.4.1.2011.5.25.119.8.16.1.2 |
hwL2vpnAcIfPhyType |
Unsigned32{(0,256)} |
read-only |
The type of interface. Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifType textual convention. |
The actually supported access is accessible-for-notify. |
|
1.3.6.1.4.1.2011.5.25.119.8.16.1.3 |
hwL2vpnAcIfLinkType |
Unsigned32{(0,256)} |
read-only |
Specifies the LinkType |
The actually supported access is accessible-for-notify. |
|
1.3.6.1.4.1.2011.5.25.119.8.16.1.4 |
hwL2vpnAcIfEncap |
Unsigned32{(0,256)} |
read-only |
Specifies the encapsulation of the Virtual Circuit supported by the interface. |
The actually supported access is accessible-for-notify. |
|
1.3.6.1.4.1.2011.5.25.119.8.16.1.5 |
hwL2vpnAcIfMinEncapNum |
Unsigned32 |
read-only |
Specifies the minimum number of TDM frames. |
The actually supported access is accessible-for-notify. |
|
1.3.6.1.4.1.2011.5.25.119.8.16.1.6 |
hwL2vpnAcIfMaxEncapNum |
Unsigned32 |
read-only |
Specifies the maximum number of TDM frames. |
The actually supported access is accessible-for-notify. |
|
1.3.6.1.4.1.2011.5.25.119.8.16.1.7 |
hwL2vpnAcIfEncapStep |
Unsigned32 |
read-only |
Specifies the step of TDM frames. |
The actually supported access is accessible-for-notify. |
|
1.3.6.1.4.1.2011.5.25.119.8.16.1.8 |
hwL2vpnAcIfMinJitterBuffer |
Unsigned32 |
read-only |
Specifies the minimum number of JitterBuffer. |
The actually supported access is accessible-for-notify. |
|
1.3.6.1.4.1.2011.5.25.119.8.16.1.9 |
hwL2vpnAcIfMaxJitterBuffer |
Unsigned32 |
read-only |
Specifies the maximum number of JitterBuffer. |
The actually supported access is accessible-for-notify. |
|
1.3.6.1.4.1.2011.5.25.119.8.16.1.10 |
hwL2vpnAcIfJitterBufferStep |
Unsigned32 |
read-only |
Specifies the step of JitterBuffer. |
The actually supported access is accessible-for-notify. |
|
1.3.6.1.4.1.2011.5.25.119.8.16.1.11 |
hwL2vpnAcIfCfgTtpHeader |
INTEGER{enabled(1),disabled(2)} |
read-only |
Denotes the rtp-header option is enable or not |
The actually supported access is accessible-for-notify. |
|
1.3.6.1.4.1.2011.5.25.119.8.16.1.12 |
hwL2vpnAcIfMinIdleCode |
Unsigned32 |
read-only |
Specifies the minimum number of IdleCode. |
The actually supported access is accessible-for-notify. |
|
1.3.6.1.4.1.2011.5.25.119.8.16.1.13 |
hwL2vpnAcIfMaxIdleCode |
Unsigned32 |
read-only |
Specifies the maximum number of IdleCode. |
The actually supported access is accessible-for-notify. |