This table allows you to use 3-tuple information to query traffic statistics on a TE tunnel interface.
The indexes of the table are hwMplsTunnelStatisticsTunnelIndex, hwMplsTunnelStatisticsIngressLSRId, hwMplsTunnelStatisticsEgressLSRId.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.4.1.2011.5.25.121.1.14.1.1 |
hwMplsTunnelStatisticsTunnelIndex |
Unsigned32 |
not-accessible |
Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. When the MPLS signalling protocol is rsvp(2), this value equals to the value signaled in the Tunnel ID of the SESSION object. When the MPLS signalling protocol is crldp(3), this value equals to the value signaled in the LSP ID. Reference to MPLS-TE-STD-MIB. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.121.1.14.1.2 |
hwMplsTunnelStatisticsIngressLSRId |
IpAddress |
not-accessible |
Indicates the ingress LSR ID of this tunnel. When the MPLS signalling protocol is rsvp(2), this value equals to the Tunnel Sender Address in the Sender Template object and may equal to the Extended Tunnel ID in the SESSION object. When the MPLS signalling protocol is crldp(3), this value equals to the Ingress LSR Router ID in the LSPID TLV object. Reference to MPLS-TE-STD-MIB. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.121.1.14.1.3 |
hwMplsTunnelStatisticsEgressLSRId |
IpAddress |
not-accessible |
Indicates the egress LSR ID of this tunnel. Reference to MPLS-TE-STD-MIB. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.121.1.14.1.4 |
hwMplsTunnelStatisticsHCInOctets |
Counter64 |
read-only |
The total number of octets received on the interface, including framing characters. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.121.1.14.1.5 |
hwMplsTunnelStatisticsHCOutOctets |
Counter64 |
read-only |
The total number of octets transmitted out of the interface, including framing characters. |
This object is implemented as defined in the corresponding MIB files. |