Indicates the primary tunnel is protected by which bypass tunnel.
The indexes of the table are hwTunnelFrrRouteDBTunnelIndex, hwTunnelFrrRouteDBTunnelInstance, hwTunnelFrrRouteDBTunnelIngressLSRId, hwTunnelFrrRouteDBTunnelEngressLSRId.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.4.1.2011.5.25.121.1.4.1.1 |
hwTunnelFrrRouteDBTunnelIndex |
Unsigned32 |
not-accessible |
Identifies the index of the primary. Manager obtains new index values for row creation in this table by reading mplsTunnelIndexNext. When the MPLS signaling protocol is rsvp(2), this value equals to the value signaled in the Tunnel ID of the SESSION object. When the MPLS signaling protocol is crldp(3), this value equals to the value signaled in the LSP ID. Reference to MPLS-TE-STD-MIB. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.121.1.4.1.2 |
hwTunnelFrrRouteDBTunnelInstance |
Unsigned32 |
not-accessible |
Uniquely identifies a particular instance of a tunnel between a pair of ingress and egress LSRs. It is the object identifies multiple instances of tunnels for the purposes of backup and parallel tunnels. When the MPLS signaling protocol is rsvp(2), this value equals to the LSP ID of the Sender Template object. When the signaling protocol is crldp(3), there is no equivalent signaling object. Reference to MPLS-TE-STD-MIB. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.121.1.4.1.3 |
hwTunnelFrrRouteDBTunnelIngressLSRId |
Unsigned32 |
not-accessible |
Identifies the ingress LSR ID of the primary tunnel. When the MPLS signalling protocol is rsvp(2),LSR ID equals to the Tunnel Sender Address in the Sender Template object or the Extended Tunnel Id in the SESSION object. When the MPLS signalling protocol is crldp(3), LSR ID equals to the Ingress LSR Router ID in the LSPID TLV object. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.121.1.4.1.4 |
hwTunnelFrrRouteDBTunnelEngressLSRId |
Unsigned32 |
not-accessible |
Identifies the egress LSR ID of the primary tunnel. Reference to MPLS-TE-STD-MIB. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.121.1.4.1.5 |
hwTunnelFrrRouteDBBypassIfIndex |
Unsigned32 |
read-only |
Indicates the interface index of the bypass tunnel. |
The actually supported access is accessible-for-notify. This object is used only as the VB bound variable of the alarm. |
|
1.3.6.1.4.1.2011.5.25.121.1.4.1.6 |
hwTunnelFrrRouteDBInnerLabel |
Unsigned32 |
read-only |
Indicates the inner label of the primary tunnel and bypass tunnel. |
The actually supported access is accessible-for-notify. This object is used only as the VB bound variable of the alarm. |