hwMplsTunnelDownReason

1.3.6.1.4.1.2011.5.25.121.2.2.3

hwMplsTunnelDownReason

INTEGER{other(1),staticLspDown(2),staticCrlspDown(3),outIfDown(4),resourcePreempted(5),rsvpMessageTimeout(6),rsvpNeighborLost(7),bypassTunnelDownOrUnbinded(8),cspfComputeFail(9),userShutdown(10),tpoamLossOfContinuity(11),tpoamAlarmIndicationSignal(12),tpoamRemoteDefectIndication(13),tpoamUnexpectedMEG(14),tpoamUnexpectedMEP(15),tpoamLossSF(16),tpoamPeriod(17),mplsOamLocv(18),mplsOamExcess(19),mplsOamMisMatch(20),mplsOamMisMerge(21),mplsOamUnknown(22),mplsOamBdi(23),mplsOamFdi(24),mplsOamSF(25),mplsOamSD(26),mplsOamDOamFail(27),serviceResume(28),serviceDelete(29),p2mpAllLeafDown(30),clear(100)}

accessible-for-notify

Indicates the alarm reason as below:

The value is an enumerated type and case sensitive, which can be:

1.other(1) -indicates that another cause was involved.

2.staticLspDown(2) -indicates that Static LSP down.

3.staticCrlspDown(3) -indicates that Static CR-LSP down.

4.outIfDown(4) -indicates that the out interface of the RSVP LSP ingress is down.

5.resourcePreempted(5) -indicates that the resource of RSVP LSP is preempted.

6.rsvpMessageTimeout(6) -indicates that RSVP message timeout.

7.rsvpNeighborLost(7) -indicates that RSVP neighbor lost.

8.bypassTunnelDownOrUnbinded(8) -indicates that The bypass-tunnel is down or is unbinded with main tunnel, as bypass-tunnel is in used.

9.cspfComputeFail(9) -indicates that CSPF compute fail.

10.userShutdown(10) -indicates that user shutdown the tunnel.

11.tpoamLossOfContinuity(11) -indicates that TPOAM indicates the connectivity fault of the link.

12.tpoamAlarmIndicationSignal(12) -indicates that TPOAM indicates receive alarm indication signal defect of the link.

13.tpoamRemoteDefectIndication(13) -indicates that TPOAM indicates the remote defect of the link.

14.tpoamUnexpectedMEG(14) -indicates that TPOAM indicates receive unexpected MEG-ID defect of the link.

15.tpoamUnexpectedMEP(15) -indicates that TPOAM indicates receive unexpected MEP-ID defect of the link.

16.tpoamLossSF(16) -indicates that TPOAM indicates packet lost exceed signal fault threshold in the local link.

17.tpoamPeriod(17) -indicates that TPOAM indicates packet unexpected period defect of the link.

18.mplsOamLocv(18) -indicates that MPLS OAM connectivity fault.

19.mplsOamExcess(19) -indicates that MPLS OAM TTSI excess.

20.mplsOamMisMatch(20) -indicates that MPLS OAM TTSI mismatch.

21.mplsOamMisMerge(21) -indicates that MPLS OAM TTSI merge error.

22.mplsOamUnknown(22) -indicates that MPLS OAM unknown error.

23.mplsOamBdi(23) -indicates MPLS OAM BDI.

24.mplsOamFdi(24) -indicates MPLS OAM FDI.

25.mplsOamSF(25) -indicates that MPLS OAM signal fail.

26.mplsOamSD(26) -indicates that MPLS OAM signal degrade.

27.mplsOamDOamFail(27) -indicates that MPLS OAM fail.

28.serviceResume(28) -indicates that service resume.

29.serviceDelete(29) -indicates that service delete.

30.p2mpAllLeafDown(30) -indicates that all the P2MP leafs are down.

31.clear(100) -indicates that alarm clears.

This object is implemented as defined in the corresponding MIB files.