hwMstpPortTable

1.3.6.1.4.1.2011.5.25.42.4.1.20.1.1

hwMstpiPortIndex

Integer32

accessible-for-notify

The index of the bridge port.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.20.1.2

hwMstpiState

INTEGER{disabled(1),discarding(2),learning(4),forwarding(5)}

read-only

The current state of the port. It must be disabled, discarding, learning or forwarding.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.20.1.3

hwMstpiPortPriority

Integer32{(0,240)}

read-write

The value of the priority field which is contained in the

first (in network byte order) four bits of the (2 octet long) Port ID.

The other octet of the Port ID is given by the value of mstiPortIndex.

And step of 16. It is the priority of the port in the multiple spanning tree instance,

and it can be used to determine the role of the port in the multiple spanning tree.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.20.1.4

hwMstpiPathCost

Integer32{(1,200000000)}

read-write

The value of this object identifies the path cost of the port.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.20.1.5

hwMstpiDesignatedRoot

OCTET STRING{(8,8)}

read-only

The Bridge Identifier of the Root Bridge for the port of the Spanning

Tree instance identified by the MSTID

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.20.1.6

hwMstpiDesignatedCost

Integer32

read-only

The value of this object identifies the path cost of the designated port.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.20.1.7

hwMstpiDesignatedBridge

OCTET STRING{(8,8)}

read-only

The Bridge Identifier of the bridge which this port considers to

be the Designated Bridge for this port's segment.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.20.1.8

hwMstpiDesignatedPort

OCTET STRING{(2,2)}

read-only

The port Identifier of the port on the Designated Bridge

for this port's segment.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.20.1.9

hwMstpiStpPortEdgeport

INTEGER{disable(1),enable(2),undo(3)}

read-write

This object indicates whether the port is an edge port.

By default, a port is a non-edge port. The value can be changed through configuration.

disable: indicates an edge port in the disabled state.

enable: indicates an edge port in the enabled state.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.20.1.10

hwMstpiStpPortPointToPoint

INTEGER{forceTrue(1),forceFalse(2),auto(3)}

read-write

The value of this object identifies whether the port is a Point-to-Point port.

1: forceTrue

2: forceFalse

3: auto

The default value is auto.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.20.1.11

hwMstpiStpMcheck

INTEGER{enable(1),unused(65535)}

read-write

The value of this object identifies the operation of MCHECK on the port.

1: enable When you set this object, the value can be enable only.

2: unused When you access the value of this object, it is unused.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.20.1.12

hwMstpiStpTransLimit

Integer32{(0,255)}

read-write

The value of this object identifies the transmission times of the BPDUs on the port.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.20.1.13

hwMstpiStpRXStpBPDU

Counter32

read-only

The number of received Config BPDU. Effective in CIST.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.20.1.14

hwMstpiStpTXStpBPDU

Counter32

read-only

The number of transmitted Config BPDU. Effective in CIST.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.20.1.15

hwMstpiStpRXTCNBPDU

Counter32

read-only

The number of received TCN BPDU. Effective in CIST.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.20.1.16

hwMstpiStpTXTCNBPDU

Counter32

read-only

The number of transmitted TCN BPDU. Effective in CIST.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.20.1.17

hwMstpiStpRXRSTPBPDU

Counter32

read-only

The number of received RST BPDU. Effective in CIST.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.20.1.18

hwMstpiStpTXRSTPBPDU

Counter32

read-only

The number of transmitted RST BPDU. Effective in CIST.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.20.1.19

hwMstpiStpRXMSTPBPDU

Counter32

read-only

The number of received MST BPDU. Effective in CIST.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.20.1.20

hwMstpiStpTXMSTPBPDU

Counter32

read-only

The number of transmitted MST BPDU. Effective in CIST.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.20.1.21

hwMstpiStpClearStatistics

INTEGER{clear(1),unused(65535)}

read-write

The value of this object identifies the status of clearing statistics on the port.

1: clear When you perform SET operation to this object, the value can be clear only.

2: unused When you perform GET operation to this object, the value of this object is unused.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.20.1.22

hwMstpiStpDefaultPortCost

INTEGER{reset(1),unused(65535)}

read-write

The value of this object identifies the default cost of the port.

1: reset When you perform SET operation to this object, the value can be reset only.

2: unused When you perform GET operation to this object, the value of this object is unused.

By default, the path cost value of the port on each MSTI is the path cost corresponding to the port rate.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.20.1.23

hwMstpiStpStatus

INTEGER{enabled(1),disabled(2)}

read-write

The value of this object identifies the spanning tree status on the port.

1: enable

2: disable

The default value is enable.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.20.1.24

hwMstpiPortRootGuard

INTEGER{enabled(1),disabled(2)}

read-write

The value of this object identifies whether the root protection is enabled on the port.

1: enable

2: disable

By default, the root protection is disabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.20.1.25

hwMstpiPortLoopGuard

INTEGER{enabled(1),disabled(2)}

read-write

The value of this object identifies whether the loopback protection is enabled on the port.

1: enable

2: disable

By default, the loopback protection is disabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.20.1.26

hwMstpPortCompliance

INTEGER{auto(1),dotls(2),legacy(3)}

read-write

The value of this object identifies the protocol format of the MSTP packet sent and received on the port.

The protocol format can be one of the following:

1: auto (the self-adaptive protocol format)

2: dotls (the standard IEEE 802.1s format)

3: legacy (the proprietary protocol format)

By default, the protocol format of the MSTP packet is self-adaptive, that is, auto(1).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.20.1.27

hwMstpConfigDigestSnooping

INTEGER{enabled(1),disabled(2)}

read-write

This object indicates whether the digest snooping function is enabled on the port:

1: enabled

2: disabled

By default, the function is not enabled. In other words, the default value is disabled(2).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.20.1.30

hwMstpNoAgreementCheck

INTEGER{enabled(1),disabled(2)}

read-write

Whether enhance agreement is enabled.

When Huawei datacomm devices running the VRP are internetworking

with non-Huawei devices, you need to enable this on Huawei devices

to configure the mode of the fast transition mechanism the same as

that on non-Huawei devices.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.20.1.32

hwMstpiStpPortBpduFilter

INTEGER{disable(1),enable(2),undo(3)}

read-write

This object indicates whether the port is enabled to send or receive BPDUs.

disable(1): indicates that the function of sending or receiving BPDUs is in the disabled state on the port.

enable(2): indicates that the function of sending or receiving BPDUs is in the enabled state on the port.

undo(3): indicates that the port is not configured with the function of sending or receiving BPDUs.

By default, a port is not configured with the function of sending or receiving BPDUs.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.20.1.33

hwMstpiPortRole

INTEGER{disabled(1),alternate(2),backup(3),root(4),designated(5),master(6)}

read-only

Indicates the port role on a particular instance.

This object is implemented as defined in the corresponding MIB files.