hwMstpProNewPortTable

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.1

hwMstpProNewPortState

INTEGER{disabled(1),discarding(2),learning(4),forwarding(5)}

read-only

The value of this object identifies the spanning tree status on the port where the MSTI is configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.2

hwMstpProNewPortPriority

Integer32{(0,240)}

read-write

The value of this object identifies the priority of the port where the MSTI is configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.3

hwMstpProNewPortPathCost

Integer32{(1,200000000)}

read-write

The value of this object identifies the path cost of the port where the MSTI is configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.4

hwMstpProNewPortDesignatedRoot

OCTET STRING{(8,8)}

read-only

The Bridge Identifier of the Root Bridge for the port of the

MSTP process Spanning Tree.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.5

hwMstpProNewPortDesignatedCost

Integer32

read-only

The value of this object identifies the specified cost of the port where the MSTI is configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.6

hwMstpProNewPortDesignatedBridge

OCTET STRING{(8,8)}

read-only

The Bridge Identifier of the bridge which this port considers to

be the Designated Bridge for this port's segment.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.7

hwMstpProNewPortDesignatedPort

OCTET STRING{(2,2)}

read-only

The port identifier of the port on the Designated Bridge

for this port's segment.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.8

hwMstpProNewPortStpEdgeport

INTEGER{disable(1),enable(2),undo(3)}

read-write

Whether the port fast is enabled in the MSTP process. By default, there is no configuration on the port. When the

port is the edge port, it can change to forwarding state immediately.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.9

hwMstpProNewPortStpPointToPoint

INTEGER{forceTrue(1),forceFalse(2),auto(3)}

read-write

The value of this object identifies whether the port where the MSTI is configured is a P2P port.

The value can be:

1: forceTrue

2: forceFalse

3: auto

The default value is auto.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.10

hwMstpProNewPortStpMcheck

INTEGER{enable(1),unused(65535)}

read-write

When root interface is changed from STP mode to RSTP or MSTP mode, the

appointed interface can not switch to RSTP or MSTP mode automatically.

At the time, you need switch back with hand by set Mcheck value to enable(1).

The value unused(65535) when it is read.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.11

hwMstpProNewPortStpTransLimit

Integer32{(0,255)}

read-write

The value is used to set BPDU maximum transmission rate of the port.

If value is set 0, the transmit limit of the port is equal to the wMstpTransmitLimitDefault value

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.12

hwMstpProNewPortStpRXStpBPDU

Counter32

read-only

The number of received Config BPDUs.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.13

hwMstpProNewPortStpTXStpBPDU

Counter32

read-only

The number of transmitted Config BPDUs.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.14

hwMstpProNewPortStpRXTCNBPDU

Counter32

read-only

The number of received TCN BPDUs.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.15

hwMstpProNewPortStpTXTCNBPDU

Counter32

read-only

The number of transmitted TCN BPDUs.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.16

hwMstpProNewPortStpRXRSTPBPDU

Counter32

read-only

The number of received RST BPDUs.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.17

hwMstpProNewPortStpTXRSTPBPDU

Counter32

read-only

The number of transmitted RST BPDUs.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.18

hwMstpProNewPortStpRXMSTPBPDU

Counter32

read-only

The number of received MST BPDUs.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.19

hwMstpProNewPortStpTXMSTPBPDU

Counter32

read-only

The number of transmitted MST BPDUs.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.20

hwMstpProNewPortStpClearStatistics

INTEGER{clear(1),unused(65535)}

read-write

Clear the Spanning Tree statistics in specified MSTP process.

The value is unused(65535) when it is read.

The value must be clear(1) when it is set.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.21

hwMstpProNewPortStpDefaultPortCost

INTEGER{reset(1),unused(65535)}

read-write

The value of this object identifies the default path cost of the port where the MSTI is configured:

The value can be:

1: reset When you perform SET operation to this object, the value can be reset only.

65535: unused When you perform GET operation to this object, the value of this object is unused.

By default, the path cost value of the port on each MSTI is calculated on the basis of the port speed.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.22

hwMstpProNewPortStpStatus

INTEGER{enabled(1),disabled(2)}

read-write

Whether the Spanning Tree Protocol is enabled on this port.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.23

hwMstpProNewPortRootGuard

INTEGER{enabled(1),disabled(2)}

read-write

The value of this object identifies whether the root guard function is enabled on the port where the MSTI is configured.

The value can be: 1: enabled

2: disabled

By default, the root protection is disabled. The default value is disable(2).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.24

hwMstpProNewPortLoopGuard

INTEGER{enabled(1),disabled(2)}

read-write

The value of this object identifies whether the loop guard function is enabled on the port where the MSTI is configured.

The value can be: 1: enabled

2: disabled

By default, the loop guard function is disabled. The default value is disable(2).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.25

hwMstpProNewPortCompliance

INTEGER{auto(1),dotls(2),legacy(3)}

read-write

The value of this object identifies the protocol format of the MSTP packet sent and received on the port.

The protocol format can be one of the following:

1: auto (the self-adaptive protocol format)

2: dotls (the standard IEEE 802.1s format)

3: legacy (the proprietary protocol format)

By default, the protocol format of the MSTP packet is self-adaptive, that is, auto(1).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.26

hwMstpProNewPortConfigDigestSnooping

INTEGER{enabled(1),disabled(2)}

read-write

This object indicates whether the digest snooping function is enabled on the port:

1: enabled

2: disabled

By default, the function is not enabled. In other words, the default value is disabled(2).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.27

hwMstpProNewPortNoAgreementCheck

INTEGER{enabled(1),disabled(2)}

read-write

The value of this object identifies whether the fast convergence detection is enabled on the interface belonging to the MSTP process.

In the scenarios where Huawei devices are interconnected with non-Huawei devices, if the fast convergence detection is enabled,

the Agree mark is checked during the fast convergence.

The value can be:

1: enabled

2: disabled

By default, this function is enabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.28

hwMstpProNewPortVplsSubinterfaceEnable

INTEGER{enabled(1),disabled(2)}

read-write

The main interface notifies its sub-interfaces to update

MAC entries and ARP entries after receiving a TC message.

This prevents services from being interrupted.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.29

hwMstpProNewPortBpduEncapsulation

INTEGER{vbst(1),stp(2)}

read-write

The value of this object identifies the protocol format of the BPDU sent on the port.

The protocol format can be one of the following:

1: vbst (the VBST format)

2: stp (the STP format)

By default, the BPDU format of the MSTP packet is stp(2).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.30

hwMstpProNewPortBpduFilter

INTEGER{disable(1),enable(2),undo(3)}

read-write

This object indicates whether the port is enabled to send or receive BPDUs.

disable(1): indicates that the function of sending or receiving BPDUs is in the disabled state on the port.

enable(2): indicates that the function of sending or receiving BPDUs is in the enabled state on the port.

undo(3): indicates that the port is not configured with the function of sending or receiving BPDUs.

By default, a port is not configured with the function of sending or receiving BPDUs.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.31

hwMstpProNewPortStpRXTC

Counter32

read-only

The number of TC BPDUs received by the port.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.32

hwMstpProNewPortStpTXTC

Counter32

read-only

The number of TC BPDUs sent by the port.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.33

hwMstpProNewPortRole

INTEGER{disabled(1),alternate(2),backup(3),root(4),designated(5),master(6)}

read-only

Indicates the port role on a particular instance.

This object is implemented as defined in the corresponding MIB files.