This table describes the access and configuration of attributes of various physical interfaces.
Meaning: This table describes the attributes of the physical interface.
The index of the table is hwPhysicalPortIfIndex.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.1 |
hwPhysicalPortIfIndex |
INTEGER |
accessible-for-notify |
This object indicates the interface index. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.2 |
hwPhysicalPortDelayTime |
Unsigned32{(0,86400000)} |
read-write |
This object indicates the interface delay. The default value is 0 ms. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.3 |
hwPhysicalPortDelayRemainTime |
Unsigned32{(0,86400000)} |
read-only |
This object indicates the remaining time after the interface delay is enabled. The value is in milliseconds. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.4 |
hwPhysicalPortName |
OCTET STRING |
read-only |
Indicates the physical port name. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.9 |
hwPhysicalAutoShutLaserEnable |
INTEGER{enable(1),disable(2),notsupport(255)} |
read-write |
This object indicates the automatic disabling of LASER. By default, automatic disabling of LASER is not supported. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.10 |
hwPhysicalAutoShutLaserOpenInterval |
Integer32{(100,300),(2147483647,2147483647)} |
read-write |
This object indicates the enabling interval for the automatic disabling of LASER. The default value is 2000 ms. The value 2147483647 indicates that the interface does not support this function. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.11 |
hwPhysicalAutoShutLaserCloseInterval |
Integer32{(200,30000),(2147483647,2147483647)} |
read-write |
This object indicates the disabling interval for the automatic disabling of LASER. The default value is 60000 ms. The value 2147483647 indicates that the interface does not support this function. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.12 |
hwPhysicalAutoShutLaserLongOpenInterval |
Integer32{(200,30000),(2147483647,2147483647)} |
read-write |
This object indicates the long enabling interval for the automatic disabling of LASER. The default value is 90000 ms. The value 2147483647 indicates that the interface does not support this function. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.13 |
hwPhysicalLoopbackType |
INTEGER{stopLoopback(0),local(1),remote(2)} |
read-only |
This object indicates the current interface status. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.14 |
hwPhysicalShutLaser |
INTEGER{off(1),on(2),notsupport(255)} |
read-write |
This object indicates whether the LASER function is enabled or not. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.15 |
hwPhysicalLaserStatus |
INTEGER{off(1),on(2),offline(3),notsupport(255)} |
read-only |
This object indicates the LASER status. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.16 |
hwPhysicalPortHoldUp |
INTEGER{disable(0),enable(1)} |
read-write |
This object indicates whether the interface is Up. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.17 |
hwPhysicalPortAlarmInverseEnable |
INTEGER{enable(1),disable(2)} |
read-write |
Config port alarm inverse enable. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.33 |
hwPhysicalPortLocalPhyNum |
OCTET STRING |
read-only |
Indicates the local physical port phy number. |
The actually supported access is accessible-for-notify. |
|
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.34 |
hwPhysicalPortRemotePhyNum |
OCTET STRING |
read-only |
Indicates the remote physical port phy number. |
The actually supported access is accessible-for-notify. |
|
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.35 |
hwPhysicalPortLocalGroupID |
Integer32 |
read-only |
Indicates the local physical port groupID. |
The actually supported access is accessible-for-notify. |
|
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.36 |
hwPhysicalPortRemteGroupID |
Integer32 |
read-only |
Indicates the remote physical port groupID. |
The actually supported access is accessible-for-notify. |
|
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.37 |
hwPhysicalPortBW |
OCTET STRING |
read-only |
Indicates the local port bandwidth |
The actually supported access is accessible-for-notify. |
|
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.38 |
hwPhysicalPortList |
OCTET STRING |
read-only |
Indicates the physical port list |
The actually supported access is accessible-for-notify. |
|
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.39 |
hwPhysicalPortPortType |
Integer32 |
read-only |
Indicates the physical port type |
The actually supported access is accessible-for-notify. |
|
1.3.6.1.4.1.2011.5.25.157.1.8.1.1.40 |
hwPhysicalPortAlarmReason |
Integer32 |
read-only |
Indicates the physical port alarm reason |
The actually supported access is accessible-for-notify. |