This table describes the basic information about a PTP port.
The index of the table is hwPtpPortIfIndex.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.1 |
hwPtpPortIfIndex |
INTEGER |
not-accessible |
The index of this table is hwPtpPortIfIndex. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.2 |
hwPtpPortEnable |
INTEGER{enabled(1),disabled(2)} |
read-create |
The port enable PTP function. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.3 |
hwPtpPortDelayMechanism |
INTEGER{none(1),delay(2),pdelay(3)} |
read-create |
The port delay mechanism. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.4 |
hwPtpPortType |
INTEGER{none(1),tc(2),bc(3),tcoc(4),oc(5),tgm(6),tbc(7),ttsc(8)} |
read-create |
PTP port type. If the device type is set to tcandbc, the PTP port type can be configured and queried. If the device type is set to another value, the PTP port type can only be queried. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.5 |
hwPtpPortDomain |
Integer32{(0,255)} |
read-create |
This port's domain,only used in the PTP device type is tcandbc. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.6 |
hwPtpPortTcOcStaticClockId |
OCTET STRING |
read-create |
TcOc device sourceport clockId. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.7 |
hwPtpPortTcOcStaticClockPortNum |
Integer32{(0,65535)} |
read-create |
TcOc device sourceport number. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.8 |
hwPtpPortTcOcStaticClockSlot |
Integer32 |
read-create |
TcOc device portnumber slot. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.9 |
hwPtpPortTcOcStaticClockCard |
Integer32 |
read-create |
TcOc device portnumber card. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.10 |
hwPtpPortTcOcStaticClockPort |
Integer32 |
read-create |
TcOc device portnumber port. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.11 |
hwPtpPortAnnounceInterval |
Integer32{(0,20)} |
read-create |
Interval of sending announce message. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.12 |
hwPtpPortAnnounceReceiptTimeout |
Integer32{(4,4),(8,8),(16,16),(32,32),(64,64),(128,128),(256,256)} |
read-create |
Timeout of receiving announce message. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.13 |
hwPtpPortSyncInterval |
Integer32{(0,20)} |
read-create |
Interval of sending sync message. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.14 |
hwPtpPortMinDelayReqInterval |
Integer32{(0,20)} |
read-create |
Interval of sending DelayReq message. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.15 |
hwPtpPortMinPdelayReqInterval |
Integer32{(0,20)} |
read-create |
Interval of sending PdelayReq message. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.16 |
hwPtpPortAsymmetryNegativeCorrection |
Unsigned32{(0,2000000)} |
read-create |
Negtive asymmetry-correction value |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.17 |
hwPtpPortAsymmetryPositiveCorrection |
Unsigned32{(0,2000000)} |
read-create |
Positive asymmetry-correction value |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.18 |
hwPtpPortMacEgressDestinationMac |
OCTET STRING{(6,6)} |
read-create |
MacEgress destination Mac. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.19 |
hwPtpPortMacEgressVlanId |
Integer32{(0,0),(1,4094)} |
read-create |
MacEgress VlanId. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.20 |
hwPtpPortMacEgressPacketPriority |
Integer32{(0,7)} |
read-create |
MacEgress Packet Priority. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.21 |
hwPtpPortUdpEgressSourceIp |
IpAddress |
read-create |
UdpEgress SourceIp. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.22 |
hwPtpPortUdpEgressDestinationIp |
IpAddress |
read-create |
UdpEgress DestinationIp. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.23 |
hwPtpPortUdpEgressDestinationMac |
OCTET STRING{(6,6)} |
read-create |
UdpEgress Destination Mac. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.24 |
hwPtpPortUdpEgressDscp |
Integer32{(0,63)} |
read-create |
UdpEgress Dscp. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.25 |
hwPtpPortUdpEgressVlanId |
Integer32{(0,0),(1,4094)} |
read-create |
UdpEgress VlanId. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.26 |
hwPtpPortUdpEgressPacketPriority |
Integer32{(0,7)} |
read-create |
UdpEgress Packet Priority. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.27 |
hwPtpPortAnnounceDrop |
INTEGER{enabled(1),disabled(2)} |
read-create |
Enable AnnounceDrop function. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.28 |
hwPtpOldPortState |
INTEGER{master(1),slave(2),passive(3),listening(4),faulty(5),initializing(6),premaster(7),disabled(8),uncalibrated(9)} |
read-only |
Old port state. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.29 |
hwPtpPortSourcePortClockId |
OCTET STRING |
read-only |
Indicates sourceportclockid of the port. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.30 |
hwPtpPortSourcePortNum |
Integer32{(0,65535)} |
read-only |
Indicates sourceport number of the port. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.31 |
hwPtpPortSourcePortSlot |
Integer32 |
read-only |
Indicates sourceport slot of the port. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.32 |
hwPtpPortSourcePortCard |
Integer32 |
read-only |
Indicates sourceport card of the port. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.33 |
hwPtpPortSourcePort |
Integer32 |
read-only |
Indicates sourceport port of the port. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.34 |
hwPtpPortNumber |
Integer32 |
read-only |
Port number. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.35 |
hwPtpPortPortVlan |
Integer32 |
read-create |
The VLAN of packet sent from port. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.36 |
hwPtpPortCfgLinkStatus |
INTEGER{down(0),up(1)} |
read-create |
The link status of port. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.37 |
hwPtpPortCfgExtInterfaceMode |
INTEGER{extclock(1),exttime(2)} |
read-create |
The mode of interface. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.38 |
hwPtpPortCfgMsgFormat |
INTEGER{ptpeth(1),ptpip(2)} |
read-create |
The format of message. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.39 |
hwPtpPortAnnounceReceiptTimeout2 |
Integer32{(0,20)} |
read-create |
Timeout of receiving announce message. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.40 |
hwPtpPortClockStep |
INTEGER{onestep(1),twostep(2)} |
read-create |
Port clock step. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.41 |
hwPtpPortState |
INTEGER{master(1),slave(2),passive(3),listening(4),faulty(5),initializing(6),premaster(7),disabled(8),uncalibrated(9)} |
read-only |
Current port state. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.42 |
hwPtpPeerAnnounceSendInterval |
Integer32{(0,20)} |
read-only |
peer announce send interval. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.43 |
hwPtpPortName |
OCTET STRING |
read-only |
Port name. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.44 |
hwPtpPortCfgState |
INTEGER{master(1),slave(2),passive(3),listening(4),faulty(5),initializing(6),premaster(7),disabled(8),uncalibrated(9)} |
read-create |
Cfg port state value. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.45 |
hwPtpPortRingFiberLengthChangeValue |
Integer32 |
read-only |
ring fiber length change value. The default value is '0'b. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.46 |
hwPtpPortRingFiberLengthChangeValueFlag |
INTEGER{negative(0),positive(1)} |
read-only |
ring fiber length change value flag. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.47 |
hwPtpPortOldSourcePortNum |
Integer32 |
read-only |
Old source port number. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.48 |
hwPtpOldPortName |
OCTET STRING |
read-only |
Old port name. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.49 |
hwPtpPortAnnReceiptTimeout |
Integer32{(2,255)} |
read-create |
Timeout of receiving announce message. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.50 |
hwPtpPortNotSlave |
INTEGER{enabled(1),disabled(2)} |
read-create |
The notslave attribute of the port.The default value is enabled(1). |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.51 |
hwPtpPortLocalPriority |
Integer32{(1,255)} |
read-create |
The local-priority attribute of the port. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.52 |
hwPtpPortSourceStepsRemoved |
Integer32{(0,255)} |
read-only |
This object indicates the number of clock source steps removed that an interface receives. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.55 |
hwPtpPortPtsfReason |
INTEGER{none(0),losssync(1),unusable(2)} |
accessible-for-notify |
The port ptp ptsf malfunction reason. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.187.2.1.1.100 |
hwPtpPortRowStatus |
INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)} |
read-create |
The row status. |
The actually supported access is read-only. |