BitsClockSourceTable.
External time BITS clock source table.
The index of the table is hwPtpBitsPortIndex.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.4.1.2011.5.25.187.2.3.1.1 |
hwPtpBitsPortIndex |
Integer32{(1,10)} |
not-accessible |
The BitsPortIndex. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.187.2.3.1.2 |
hwPtpBitsClockAccuracy |
Integer32{(0,255),(1024,1024)} |
read-write |
BitsClockAccuracy. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.3.1.3 |
hwPtpBitsClockClass |
Integer32{(0,255),(1024,1279)} |
read-write |
BitsClockClass. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.3.1.4 |
hwPtpBitsPriority1 |
Integer32{(0,255)} |
read-write |
BitsPriority1. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.3.1.5 |
hwPtpBitsPriority2 |
Integer32{(0,255)} |
read-write |
BitsPriority2. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.3.1.6 |
hwPtpBitsTimeSource |
INTEGER{atomicclock(1),gps(2),terrestrialradio(3),ptp(4),ntp(5),handset(6),other(7),internaloscillator(8),undo(1024)} |
read-write |
BitsTimeSource. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.3.1.7 |
hwPtpBitsSignal |
INTEGER{onepps(1),twomhz(2),twombps(3),dcls(4),none(5)} |
read-only |
The signal of BITS. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.187.2.3.1.8 |
hwPtpBitsSwitch |
INTEGER{off(1),on(2)} |
read-write |
The switch status. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.3.1.9 |
hwPtpBitsDirection |
INTEGER{in(1),out(2),both(3),none(4)} |
read-only |
The direction of BITS. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.187.2.3.1.10 |
hwPtpBitsNormalStatus |
INTEGER{normal(1),abnormal(2)} |
read-only |
The normal status of BITS. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.187.2.3.1.11 |
hwPtpBitsReceiveDelay |
Integer32{(0,2000000)} |
read-write |
Bits receive delay correction. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.3.1.12 |
hwPtpBitsSendDelay |
Integer32{(0,10000)} |
read-write |
Bits send delay correction. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.3.1.14 |
hwPtpBitsGMClockId |
OCTET STRING |
read-write |
The grandmaster-clockid of BITS. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.187.2.3.1.15 |
hwPtpBitsGMOffsetScaledLogVariance |
INTEGER{hFFFF(1),h4E5D(2),h4B32(3)} |
read-write |
The OffsetScaledLogVariance of BITS. |
The actually supported access is read-only. |