hwPWVcExpandTable

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.1

hwPWVcIDExpand

Unsigned32

not-accessible

Index for the conceptual row identifying a PW within

this PW Emulation table.Used in the outgoing PW ID field within the 'Virtual

Circuit FEC Element'.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.2

hwPWVcTypeExpand

INTEGER{frameRelayDlciMartini(1),atmAal5SduVccTransport(2),atmTransparentCellTransport(3),vlan(4),ethernet(5),hdlc(6),ppp(7),cem(8),atmN2OneVccCellTransport(9),atmN2OneVpcCellTransport(10),ipLayer2Transport(11),atmOne2OneVccCellMode(12),atmOne2OneVpcCellMode(13),atmAal5PduVccTransport(14),frameRelayPortMode(15),cep(16),saE1oP(17),saT1oP(18),saE3oP(19),saT3oP(20),cESoPsnBasicMode(21),tDMoIPbasicMode(22),l2VpnCESoPSNTDMwithCAS(23),l2VpnTDMoIPTDMwithCAS(24),frameRelayDlci(25),ipInterworking(64),unknown(255)}

not-accessible

The type of the Virtual Circuit.This value indicate the service to be carried over

this PW.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.3

hwPWVcPeerAddrTypeExpand

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

read-create

Denotes the address type of the peer node. It should be

set to 'unknown' if PE/PW maintenance protocol is not used

and the address is unknown.

Currently, support 'ipv4' only.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.4

hwPWVcPeerAddrExpand

IpAddress

not-accessible

This object contain the value of the peer node address

of the PW/PE maintenance protocol entity. This object

SHOULD contain a value of all zeroes if not applicable

(hwPWVcPeerAddrType is 'unknown').

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.5

hwPWVcStatusExpand

INTEGER{up(1),down(2),plugout(3),backup(4)}

read-only

Indicates the status of the PW in the local node.

Currently, can't support 'plugout'.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.6

hwPWVcInboundLabelExpand

Unsigned32

read-create

The value of this object identifies the incoming label value of a PW.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.7

hwPWVcOutboundLabelExpand

Unsigned32

read-create

The value of this object identifies the outgoing label value of a PW.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.8

hwPWVcSwitchSignExpand

INTEGER{staticTostatic(1),ldpTostatic(2),ldpToldp(3),upe(4)}

read-only

This object indicates the type of a switch PW.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.9

hwPWVcSwitchIDExpand

Unsigned32

read-create

Used in the outgoing PW ID field within the 'Virtual

Circuit FEC Element' of the switch PW.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.10

hwPWVcSwitchPeerAddrTypeExpand

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

read-create

Denotes the address type of the peer node of the switch PW.

It should be set to 'unknown' if PE/PW maintenance protocol

is not used and the address is unknown.

Currently, support 'ipv4' only.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.11

hwPWVcSwitchPeerAddrExpand

IpAddress

read-create

This object contain the value of the peer node address of the

switch PW of the PW/PE maintenance protocol entity. This object

SHOULD contain a value of all zeroes if not applicable

(hwPWVcSwitchPeerAddrType is 'unknown').

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.12

hwPWVcSwitchInboundLabelExpand

Unsigned32

read-create

The value of this object identifies the incoming label value of a switch PW.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.13

hwPWVcSwitchOutboundLabelExpand

Unsigned32

read-create

The value of this object identifies the outgoing label value of a switch PW.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.14

hwPWVcGroupIDExpand

Unsigned32

read-create

Used in the Group ID field sent to the peer PWES

within the maintenance protocol used for PW setup.

Applicable if pwVcOwner equal 'pwIdFecSignaling' or

'l2tpControlProtocol', should be set to zero otherwise.

Currently, this value always be zero.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.15

hwPWVcIfIndexExpand

Integer32{(0,2147483647)}

read-create

Index of the interface (or the virtual interface)

associated with the PW.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.16

hwPWVcAcStatusExpand

INTEGER{up(1),down(2),plugout(3),notify(4),notifyDown(5),downNotify(6)}

read-only

Local AC status.

Currently, can't support 'plugout'.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.17

hwPWVcACOAMStatusExpand

INTEGER{up(1),down(2)}

read-only

Denotes the AC's protocol is operational or not.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.18

hwPWVcMtuExpand

Integer32{(0,0),(46,9600)}

read-create

If not equal zero, the optional Mtu object in the

signaling protocol will be sent with this value,

representing the locally supported MTU size over the

interface (or the virtual interface) associated with the

PW.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.19

hwPWVcCtrlWordExpand

INTEGER{enable(1),disable(2)}

read-create

If signaling is used for PW establishment, this object

indicates the status of the control word negotiation,

and in both signaling or manual configuration indicates

if CW is to be present or not for this PW.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.20

hwPWVcVCCVExpand

BITS{ccCw(0),ccAlert(1),ccLabel(2),cvIcmpping(3),cvLspping(4),cvBfd(5),ccTtl(6)}

read-create

The value of this object identifies the VCCV value of a PW.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.22

hwPWVcMaxAtmCellsExpand

Unsigned32{(0,28)}

read-create

Indicates the max cell supported when vc type is atm.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.23

hwPWVcTnlPolicyNameExpand

OCTET STRING{(0,39)}

read-create

Indicates the tunnel policy name used.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.26

hwPWVcTemplateNameExpand

OCTET STRING{(0,19)}

read-create

Indicates the PW template index referenced.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.27

hwPWVcSecondaryExpand

INTEGER{true(1),false(2)}

read-create

Indicates whether or not the secondary PW is used.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.28

hwPWVcUpTimeExpand

Unsigned32

read-only

Indicates the duration when the PW keeps Up for

the last time, in seconds.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.29

hwPWOAMSyncExpand

INTEGER{true(1),false(2)}

read-create

This object indicates whether OAM mapping is enabled.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.30

hwPWVCForBfdIndexExpand

Unsigned32

read-only

The index of PW for BFD.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.31

hwPWVcDelayTimeExpand

Unsigned32

read-create

The reroute delay time.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.32

hwPWVcReroutePolicyExpand

INTEGER{delay(1),immediately(2),never(3),none(4),err(5),invalid(6),immediatelySwitch(7)}

read-create

Reroute policy.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.33

hwPWVcResumeTimeExpand

Unsigned32

read-create

The reroute resume time.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.34

hwPWVcRerouteReasonExpand

INTEGER{invalidReason(1),vcCreated(2),vcDeleted(3),ldpSessionDown(4),ldpSessionUp(5),receivedDifLabelOrMtu(6),receivedIntfParaMatching(7),receivedIntfParaUnMatched(8),receivedUnPassCbitCheck(9),receivedUnPassPwLoopCheck(10),receivedNewMapping(11),receivedNewMappingButRemoteVcDown(12),receivedWithdrawn(13),receivedLdpRelease(14),receivedLdpRequest(15),ldpGrEndProcessing(16),receivedRsvpMessage(17),interfaceUp(18),interfaceDown(19),interfaceEncapChanged(20),refresh(21),downloadAgain(22),tunnelUp(23),tunnelDown(24),receivedNewRlb(25),deletedRlb(26),vcCreatedOrTurnedToAnother(27),outInterInInvalidState(28),outInterInValidNow(29),ldpNotifiForward(30),ldpNotifiNotForward(31),pwRestart(32),downloadFtnAndIlmForEthTrunk(33),acOamFaultDetectDisable(34),remoteAcFault(35),remoteAcFaultResume(36),localAcFault(37),localAcFaultResume(38),remotePsnFault(39),remotePsnFaultResume(40),localPsnFault(41),localPsnFaultResume(42),bfdForPwStateChangeToDown(43),bfdForPwStateChangeToUp(44),bfdForPwStateChangeToAdminDown(45),bfdForPwDisable(46),manualSetEnable(47),manualSetDisable(48),delayTimeOut(49),resumeTimeOut(50),vrrpMaster(51),vrrpBackup(52),vrrpInit(53),vrrpDelete(54),vrrpTrack(55),undoVrrpTrack(56),lspPingTimeOut(57),vcDownWhenReceivedNewRLB(58),mtuMatched(59),mtuUnmatched(60),vsiShut(61),vsiResume(62),setAdminVSI(63),undosetAdminVSI(64),bvsiBindAc(65),bvsiUnbindAc(66),ivsiBindBVSI(67),ivsiUnbindBVSI(68),deletedVSI(69),reconstructFwdTable(70),mclagMaster(71),mclagBackup(72),adminPwUp(73),adminPwDown(74),vccvOk(75),vccvFailed(76),localIfnetOk(77),inVcLabelOk(78),localIfnetRelease(79),inVcLabelRelease(80),switchOverEnable(81),switchOverDisable(82),setBVSI(83),undoSetBVSI(84),shutdownBVSI(85),undoShutdownBVSI(86),notificationReceived(87),pwApsSwitch(88),routeUnreachable(89),routeReachable(90),aging(91),verification(92),tdmBitRateMatched(93),tdmBitRateUnmatched(94)}

read-only

Last reroute reason.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.35

hwPWVcLastRerouteTimeExpand

Unsigned32

read-only

Last reroute time.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.36

hwPWVcManualSetFaultExpand

INTEGER{true(1),false(2)}

read-create

This object indicates that faults on the primary or secondary PW are manually simulated.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.37

hwPWVcActiveExpand

INTEGER{true(1),false(2)}

read-only

Denotes the current vc is active or not.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.38

hwPWVcVrIfIndexExpand

Integer32{(0,2147483647)}

read-create

The value of this object identifies the index of the AC interface bound to a management VRRP backup group.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.39

hwPWVcVrIDExpand

Unsigned32{(0,255)}

read-create

The value of this object identifies the ID of a management VRRP backup group.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.40

hwPWBFDDetectMultiplierExpand

Unsigned32{(0,0),(3,50)}

read-create

The multiple of detection time.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.41

hwPWBFDMinReceiveIntervalExpand

Unsigned32{(0,0),(3,1000)}

read-create

The value of this object identifies the minimum interval at which dynamic BFD packets are received.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.42

hwPWBFDMinTransmitIntervalExpand

Unsigned32{(0,0),(3,1000)}

read-create

The value of this object identifies the minimum interval at which dynamic BFD packets are sent.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.43

hwPWDynamicBFDDetectExpand

INTEGER{true(1),false(2)}

read-create

This value indicates the capacitability to support dynamic BFD detect.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.44

hwPWBFDRemoteVcIDExpand

Unsigned32{(0,4294967295)}

read-create

The value of this object identifies the VC ID of the peer PW.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.45

hwPWEthOamTypeExpand

INTEGER{ethOam1ag(1),ethOam3ah(2),noEthOamCfg(3)}

read-create

This value indicates the type of ETH OAM.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.46

hwPWCfmMaIndexExpand

Unsigned32{(0,4294967295)}

read-only

This value indicates the current CFM MA index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.47

hwPWVcUpStartTimeExpand

OCTET STRING{(0,63)}

read-only

Specifies the time this PW status was Up(1).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.48

hwPWVcUpSumTimeExpand

Unsigned32

read-only

Indicates the accumulated time when the VC is Up,

in seconds.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.49

hwPWVcIfNameExpand

OCTET STRING{(0,63)}

read-only

Name of the interface (or the virtual interface)

associated with the PW.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.51

hwPWVcRowStatusExpand

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

RowStatus for this Table.

Restriction:

The row must be created by 'createAndGo' handle only.

Handle 'createAndWait' is forbidden.

Not support modifying configuration.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.52

hwPWVcAtmPackOvertimeExpand

Unsigned32{(0,0),(100,50000)}

read-create

The value of this object identifies the ATM cell encapsulation period.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.53

hwPWVcPwJitterBufferDepthExpand

Unsigned32{(0,64)}

read-create

The value of this object identifies the jitter buffer depth for TDMoPSN.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.54

hwPWVcPwTdmEncapsulationNumExpand

Unsigned32{(0,40)}

read-create

The value of this object identifies the number of TDM frames encapsulated in a TDMoPSN packet.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.55

hwPWVcPwIdleCodeExpand

Unsigned32{(0,255),(65535,65535)}

read-create

The value of this object identifies the filling idle code used when a jitter buffer underflow occurs.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.56

hwPWVcPwRtpHeaderExpand

Unsigned32

read-create

This object indicates the RTP header carried in a transparently transmitted TDM frame.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.57

hwPWVcSwitchTnlPolicyNameExpand

OCTET STRING{(0,39)}

read-create

This object indicates the tunnel policy name for the tunnel to which a switch PW is iterated.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.58

hwPWVcCfmMdIndexExpand

Unsigned32{(0,4095),(4294967295,4294967295)}

read-only

This value indicates the current CFM MD index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.59

hwPWVcCfmMaNameExpand

OCTET STRING{(0,43)}

read-create

This value indicates the current CFM MA name used.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.60

hwPWVcCfmMdNameExpand

OCTET STRING{(0,43)}

read-create

This value indicates the current CFM MD name used.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.61

hwPWVcRawOrTaggedExpand

INTEGER{raw(1),tagged(2),rawTagNotConfiged(3)}

read-only

Specifies whether the raw or tagged is configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.62

hwPWVcInterworkingTypeExpand

INTEGER{ipInterWorking(1),ipLayer2(2),ipUnknown(3)}

read-only

Specifies the interworking type of the VC entry.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.63

hwPWVcCirExpand

Unsigned32

read-create

Specifies the committed information rate, based on the VC entry.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.64

hwPWVcPirExpand

Unsigned32

read-create

Specifies the peak information rate, based on the VC entry.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.65

hwPWVcQosProfileExpand

OCTET STRING{(0,63)}

read-create

Specifies the QoS profile's name, based on the VC entry.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.66

hwPWVcSwitchCirExpand

Unsigned32

read-create

Specifies the committed information rate, based on the switch VC entry.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.67

hwPWVcSwitchPirExpand

Unsigned32

read-create

Specifies the peak information rate, based on the switch VC entry.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.68

hwPWVcSwitchQosProfileExpand

OCTET STRING{(0,63)}

read-create

Specifies the QoS profile's name, based on the switch VC entry.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.69

hwPWVcTriggerExpand

INTEGER{true(1),false(2)}

read-create

Specifies whether the PW remote interface shutdown or not.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.73

hwPWVcQosParaFromPWTExpand

INTEGER{cliOrMib(1),pwTemplate(2),unknown(3)}

read-only

This object indicates the configuration of the Qos parameters managed through command line or PW template.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.74

hwPWVcBfdParaFromPWTExpand

INTEGER{cliOrMib(1),pwTemplate(2),unknown(3)}

read-only

This object indicates the configuration of the Bfd parameters managed through command line or PW template.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.75

hwPwVcNegotiateModeExpand

INTEGER{slaveOrMaster(1),independent(2),unknown(3),frr(4)}

read-create

This object indicates the negotiation mode of the PW on the local node.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.76

hwPwVcIsBypassExpand

INTEGER{true(1),false(2)}

read-create

This object indicates whether the PW is the bypass PW.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.77

hwPwVcIsAdminExpand

INTEGER{true(1),false(2)}

read-create

This object indicates whether the PW is the administrator PW.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.78

hwPwVcAdminPwIfIndexExpand

Integer32{(0,2147483647)}

read-create

This object indicates the index of the interface on which the administrator PW resides after it is being tracked by the service PW.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.79

hwPwVcAdminPwLinkStatusExpand

INTEGER{up(1),down(2),unknown(3)}

read-only

This object indicates the status of the administrator PW after it is being tracked by the service PW.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.84

hwPwVcSwitchBackupVcIdExpand

Unsigned32

read-create

This object indicates the VC ID of the switch backup PW.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.85

hwPwVcSwitchBackupVcPeerAddrTypeExpand

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

read-only

This object indicates type of the IP address of the peer on the switch backup PW.

Currently, only IPv4 addresss are supported.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.86

hwPwVcSwitchBackupVcPeerAddrExpand

IpAddress

read-create

This object indicates the IP address of the peer on the switch backup PW.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.87

hwPwVcSwitchBackupVcReceiveLabelExpand

Unsigned32

read-only

This object indicates the inbound label of the switch backup VC.

For a static VC, the value of the inbound label ranges from 16 to 1023.

For a dynamic VC, the inbound label is automatically generated by the system.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.88

hwPwVcSwitchBackupVcSendLabelExpand

Unsigned32

read-only

This object indicates the outbound label of the switch backup VC.

For a static VC, the value of the outbound label ranges from 0 to 1048575.

For a dynamic VC, the outbound label is automatically generated by the system.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.89

hwPwVcSwitchBackupVcTnlPolicyNameExpand

OCTET STRING{(0,19)}

read-create

This object indicates the name of the tunnel policy of the switch backup VC.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.93

hwPwVcSlaveMasterModeExpand

INTEGER{slave(1),master(2),unknown(3),bypass(4)}

read-only

This object indicates whether the status of the VC is master or slave.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.94

hwPwVcSwitchVcSlaveMasterModeExpand

INTEGER{slave(1),master(2),unknown(3)}

read-only

This object indicates whether the status of the switch VC is master or slave.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.95

hwPwVcSwitchBackupVcSlaveMasterModeExpand

INTEGER{slave(1),master(2),unknown(3)}

read-only

This object indicates whether the status of the switch backup VC is master or slave.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.96

hwPwVcSwitchVcActiveExpand

INTEGER{true(1),false(2)}

read-only

This object indicates whether the status of the switch VC is active or not.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.97

hwPwVcSwitchBackupVcActiveExpand

INTEGER{true(1),false(2)}

read-only

This object indicates whether the status of the switch backup VC is active or not.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.98

hwPwVcSwitchCwTransExpand

INTEGER{true(1),false(2)}

read-create

This object indicates whether the SPE support Control Word Transparent or not,default is false.

The actually supported access is read-only.