When a sub interface configured QinQ-termination function, hwQinQSubIfTermStatTable used to statistic total number of the out packets and in packets.
The indexes of the table are hwQinQSubIfTermStatIfIndex, hwQinQSubIfTermStatPEVlan, hwQinQSubIfTermStatCEVlan.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.4.1.2011.5.25.116.2.5.1.1 |
hwQinQSubIfTermStatIfIndex |
INTEGER |
not-accessible |
Index number of the QinQ-termination interface. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.116.2.5.1.2 |
hwQinQSubIfTermStatPEVlan |
Integer32{(1,4094)} |
not-accessible |
Outer vlan in packets which input the QinQ sub interface, used to indicate the packets as an index. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.116.2.5.1.3 |
hwQinQSubIfTermStatCEVlan |
Integer32{(1,4094)} |
not-accessible |
Inner vlan in packets which input the QinQ sub interface, used to indicate the packets as an index. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.116.2.5.1.4 |
hwQinQSubIfTermStatGroupId |
Integer32{(1,16)} |
read-only |
The group-management id. The statistic number of packets can not get if the statistic funtion is not enabled. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.116.2.5.1.5 |
hwQinQSubIfTermStatOutPackets |
Counter64 |
read-only |
Total number of out packets of the sub interface. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.116.2.5.1.6 |
hwQinQSubIfTermStatOutBytes |
Counter64 |
read-only |
Total number of out bytes of the sub interface. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.116.2.5.1.7 |
hwQinQSubIfTermStatInPackets |
Counter64 |
read-only |
Total number of in packets of the sub interface. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.116.2.5.1.8 |
hwQinQSubIfTermStatInBytes |
Counter64 |
read-only |
Total number of in bytes of the sub interface. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.116.2.5.1.9 |
hwQinQSubIfTermStatOutBdPackets |
Counter64 |
read-only |
Total number of broadcast packets transmitted out of the sub interface. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.116.2.5.1.10 |
hwQinQSubIfTermStatInBdPackets |
Counter64 |
read-only |
Total number of broadcast packets received from the sub interface. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.116.2.5.1.11 |
hwQinQSubIfTermStatOutMuPackets |
Counter64 |
read-only |
Total number of multicast packets transmitted out of the sub interface. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.116.2.5.1.12 |
hwQinQSubIfTermStatInMuPackets |
Counter64 |
read-only |
Total number of multicast packets received from the sub interface. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.116.2.5.1.13 |
hwQinQSubIfTermStatOutUniPackets |
Counter64 |
read-only |
Total number of unicast packets transmitted out of the sub interface. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.116.2.5.1.14 |
hwQinQSubIfTermStatInUniPackets |
Counter64 |
read-only |
Total number of unicast packets received from the sub interface. |
This object is implemented as defined in the corresponding MIB files. |
The statistics are collected based on the group. So, the value of the statistics can be obtained only when the group ID is not zero and the group statistics function is enabled
with the flag.