This table provides per TDM PW performance information. The contents of this table entry are reset to zero and gotten new information every 15 minutes.
The index of the table is hwPWTDMIfIndex.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.4.1.2011.5.25.119.7.1.4.1.1 |
hwPWTDMIfIndex |
INTEGER |
not-accessible |
Index of the interface (or the virtual interface) associated with the PW. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.119.7.1.4.1.2 |
hwPWTDMPerfCurrentEnable |
INTEGER{enabled(1),disabled(2)} |
read-write |
This object indicates the enable sign of TDM PW's performance, based on the interface. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.7.1.4.1.3 |
hwPWTDMPerfCurrentMissingPkts |
Unsigned32 |
read-only |
Number of missing packets (as detected via control word sequence number gaps). |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.119.7.1.4.1.4 |
hwPWTDMPerfCurrentJtrBfrOverruns |
Unsigned32 |
read-only |
Number of times the jitter buffer was overrun. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.119.7.1.4.1.5 |
hwPWTDMPerfCurrentJtrBfrUnderruns |
Unsigned32 |
read-only |
Number of times a packet needed to be played out and the jitter buffer was empty. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.119.7.1.4.1.6 |
hwPWTDMPerfCurrentMisOrderDropped |
Unsigned32 |
read-only |
Number of packets detected out of order (via control word sequence numbers) that could not be re-ordered or could not fit in the jitter buffer. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.119.7.1.4.1.7 |
hwPWTDMPerfCurrentMalformedPkt |
Unsigned32 |
read-only |
Number of packets detected with unexpected size or bad headers' stack. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.119.7.1.4.1.8 |
hwPWTDMPerfCurrentESs |
Unsigned32 |
read-only |
The value of this object identifies the accumulated number of seconds in which error bits exist. That is, the time during which the TDM-encapsulated PW drops packets or receives error packets, including disordered packets and malformed packets. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.119.7.1.4.1.9 |
hwPWTDMPerfCurrentSESs |
Unsigned32 |
read-only |
The value of this object identifies the accumulated number of seconds in which severe error bits exist. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.119.7.1.4.1.10 |
hwPWTDMPerfCurrentUASs |
Unsigned32 |
read-only |
The value of this object identifies the number of seconds in which the TDM-encapsulated PW is unavailable. If the number of severe error bits exist in the TDM-encapsulated PW for more than 10 seconds, the TDM-encapsulated PW is considered unavailable. Counting of the number of unavailable seconds starts from the time when severe error bits occur. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.119.7.1.4.1.11 |
hwPWTDMPerfCurrentStrayPkt |
Unsigned32 |
read-only |
The number of misconnected packets during the check period |
This object is implemented as defined in the corresponding MIB files. |