This table is the VPLS's configuration table. Users can create or delete the VSI by it.
The index of the table is hwVplsVsiName.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.1 |
hwVplsVsiName |
OCTET STRING{(1,31)} |
accessible-for-notify |
This object indicates the VSI's name. |
Code compilation depends on this node, but this node is not supported. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.2 |
hwVplsSignal |
INTEGER{ldp(1),bgp(2),bgpAd(3),bgpMh(4),ldpBgpMixed(5),ldpBgpAdMixed(6),unknown(255)} |
read-create |
This object indicates the signal type. If the signal type is LDP, VSI-ID must be designated. If the signal type is BGP, RD must be designated. The default value is unknown(255). |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.3 |
hwVplsRD |
OCTET STRING{(0,0),(3,21)} |
read-create |
This object indicates the Route Distinguisher. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.4 |
hwVplsVsiID |
Unsigned32 |
read-create |
This object indicates the VSI id. The default value is 0. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.5 |
hwVplsVcType |
INTEGER{frameRelayDlciMartini(1),atmAal5SduVccTransport(2),atmTransparentCellTransport(3),vlan(4),ethernet(5),hdlc(6),ppp(7),cem(8),atmN2OneVccCellTransport(9),atmN2OneVpcCellTransport(10),ipLayer2Transport(11),atmOne2OneVccCellMode(12),atmOne2OneVpcCellMode(13),atmAal5PduVccTransport(14),frameRelayPortMode(15),cep(16),saE1oP(17),saT1oP(18),saE3oP(19),saT3oP(20),cESoPsnBasicMode(21),tDMoIPbasicMode(22),l2VpnCESoPSNTDMwithCAS(23),l2VpnTDMoIPTDMwithCAS(24),frameRelayDlci(25),ipInterworking(64),unknown(255)} |
read-create |
This object indicates the VC's encapsulation type. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.6 |
hwVplsStatus |
INTEGER{up(1),down(2),admindown(3)} |
read-only |
This object indicates the VPLS's status. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.7 |
hwVplsMtu |
Unsigned32{(328,65535)} |
read-create |
This object indicates the VPLS's MTU.The default value is 1500. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.8 |
hwVplsTunnelPolicy |
OCTET STRING{(0,39)} |
read-create |
This object indicates the tunnel policy. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.9 |
hwVplsDescription |
OCTET STRING{(0,64)} |
read-create |
This object indicates the description information. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.10 |
hwVplsLearnStyle |
INTEGER{qualify(1),unqualify(2)} |
read-create |
This object indicates the style of learning the MAC address. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.11 |
hwVplsMacLearnEnable |
INTEGER{enable(1),disable(2)} |
read-create |
This object indicates the enable sign of learning the MAC address. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.12 |
hwVplsMacLimitEnable |
INTEGER{enable(1),disable(2)} |
read-create |
This object indicates the enable sign of the MAC addresses number limit. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.13 |
hwVplsStatisticsEnable |
INTEGER{enable(1),disable(2)} |
read-create |
This object indicates the enable sign of statistics. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.14 |
hwVplsUnknowMulticast |
INTEGER{broadcast(1),drop(2),localHandle(3)} |
read-create |
This object indicates the processing mode when the multicast MAC entry not found in FDB. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.15 |
hwVplsUnknowUnicast |
INTEGER{broadcast(1),drop(2),localHandle(3)} |
read-create |
This object indicates the processing mode when the unicast MAC entry not found in FDB. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.17 |
hwVplsVsiType |
INTEGER{operationVsi(1),adminVsi(2)} |
read-create |
This object indicates the VSI's type. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.18 |
hwVplsAdminVsiName |
OCTET STRING{(0,255)} |
read-create |
This object indicates the AdminVsi's name this VSI binding to |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.19 |
hwVplsAcIsolateFlag |
INTEGER{enable(1),disable(2)} |
read-create |
This object indicates whether the AC in the VSI is isolated |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.20 |
hwVplsDiffServMode |
INTEGER{pipe(1),shortpipe(2),uniform(3),egressPipe(4),egressShortpipe(5),egressShortpipeTrustInnerVlan8021p(6),egressShortpipeTrustIpDscp(7)} |
read-create |
Different service mode of the interface binding of vsi , default is uniform. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.21 |
hwVplsDiffServServiceClass |
INTEGER{be(1),af1(2),af2(3),af3(4),af4(5),ef(6),cs6(7),cs7(8),invalidClass(255)} |
read-create |
PHB in the ingress PE, the value must be be,f1,af2,af3,af4,ef,cs6,cs7.The default value is invalidClass(255). |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.22 |
hwVplsDiffServColor |
INTEGER{green(1),yellow(2),red(3),invalidColor(255)} |
read-create |
Remarked color of packet in the ingress PE, the value must be green,yellow,red.The default value is invalidColor(255). |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.23 |
hwVplsDiffServDSName |
OCTET STRING{(0,48)} |
read-create |
Name of different service domain |
The actually supported access is read-only. The actually supported value range is 1-48. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.24 |
hwVplsInterfaceWithdraw |
INTEGER{enable(1),disable(2)} |
read-create |
Enable VSI send LDP mac-withdraw when VSI receive interface status changes event. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.25 |
hwVplsUpe2NpeWithdraw |
INTEGER{enable(1),disable(2)} |
read-create |
VSI forward message to all the NPE when VSI receive message from UPE. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.26 |
hwVplsUpe2UpeWithdraw |
INTEGER{enable(1),disable(2)} |
read-create |
VSI forward message to all the other UPE when VSI receive message from UPE. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.27 |
hwVplsNpe2UpeWithdraw |
INTEGER{enable(1),disable(2)} |
read-create |
VSI forward message to all the UPE when VSI receive message from NPE. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.28 |
hwVplsDiscovery |
INTEGER{static(1),auto(2),none(3)} |
read-create |
This object indicates the discovery type. If the discovery type is static, the signal must be LDP. If the discovery type is auto, the signal must be BGP. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.29 |
hwVplsMacWithdrawEnable |
INTEGER{enabled(1),disabled(2)} |
read-create |
This object indicates the enable sign of the MAC address withdraw. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.30 |
hwVplsVsiCir |
Unsigned32 |
read-create |
This object indicates the committed information rate, based on VSI. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.31 |
hwVplsVsiPir |
Unsigned32 |
read-create |
This object indicates the peak information rate, based on VSI. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.32 |
hwVplsVsiQosProfileName |
OCTET STRING{(0,63)} |
read-create |
This object indicates the QoS profile's name, based on VSI. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.33 |
hwVplsAdminStatus |
INTEGER{up(1),down(2)} |
read-create |
This object indicates the VSI's admin status. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.34 |
hwVplsIgnoreAcState |
INTEGER{enabled(1),disabled(2)} |
read-create |
This object indicates the enable sign of the ignorer of AC state. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.38 |
hwVplsAgingTime |
Unsigned32{(0,4294967295)} |
read-create |
The aging time of the VSI MAC address. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.39 |
hwVplsUnknowUnicastMacLearning |
INTEGER{enabled(1),disabled(2)} |
read-create |
The value of this object identifies whether the MAC address learning function for the discarded unknown unicast packets is enabled. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.40 |
hwVplsFlowLabel |
INTEGER{enabled(1),disabled(2)} |
read-create |
The value of this object identifies whether the PW FlowLabel is enabled. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.52 |
hwVplsIngDiffServMode |
INTEGER{pipe(1),shortpipe(2),uniform(3)} |
read-create |
Ingress different service mode of the interface binding of vsi , default is uniform. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.53 |
hwVplsEgDiffServMode |
INTEGER{pipe(1),shortpipe(2),uniform(3)} |
read-create |
Egress different service mode of the interface binding of vsi , default is uniform. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.1.1.54 |
hwVplsDiffServTrustType |
INTEGER{outpri(0),inpri(1),ipdscp(2)} |
read-create |
Different service trust type of the interface binding of vsi , default is outpri. |
The actually supported access is read-only. |