This table is the configuration table of VPLS's LDP peer.
Users can create or delete the LDP peer entry.
The indexes of the table are hwVplsVsiName, hwVplsLdpPeerRouterID, hwVplsLdpPeerPwId.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.4.1.2011.5.25.119.1.1.11.1.1 |
hwVplsLdpPeerRouterID |
IpAddress |
not-accessible |
This object indicates the IP address of the LDP peer. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.11.1.2 |
hwVplsLdpPeerPwId |
Unsigned32 |
not-accessible |
This object indicates the PW ID. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.11.1.3 |
hwVplsLdpPeerTnlPolicyName |
OCTET STRING{(0,19)} |
read-create |
This object indicates the name of tunnel policy. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.11.1.4 |
hwVplsLdpPeerUpeType |
INTEGER{upe(1),staticupe(2),unknown(3)} |
read-create |
This object indicates the VPLS is UPE , static UPE or not. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.11.1.5 |
hwVplsLdpPeerTransLable |
Unsigned32 |
read-create |
This object indicates the transmitted label. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.11.1.6 |
hwVplsLdpPeerRecvLable |
Unsigned32 |
read-create |
This object indicates the received label. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.11.1.7 |
hwVplsLdpPeerVrrpIfIndex |
Integer32{(0,2147483647)} |
read-create |
This object indicates the VRRP interface this PW binding to. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.11.1.8 |
hwVplsLdpPeerVirtualRouterId |
Unsigned32{(0,255)} |
read-create |
This object indicates the virtual router ID this PW binding to. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.11.1.9 |
hwVplsLdpPeerCir |
Unsigned32 |
read-create |
This object indicates the committed information rate, based on the LDP peer. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.11.1.10 |
hwVplsLdpPeerPir |
Unsigned32 |
read-create |
This object indicates the peak information rate, based on the LDP peer. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.11.1.11 |
hwVplsLdpPeerQosProfileName |
OCTET STRING{(0,63)} |
read-create |
This object indicates the QoS profile's name, based on the LDP peer. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.11.1.12 |
hwVplsLdpPeerStatus |
INTEGER{down(1),up(2),plugout(3),backup(4)} |
read-only |
This object indicates the LDP peer's status. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.11.1.13 |
hwVplsLdpPeerPwName |
OCTET STRING{(0,15)} |
read-create |
This object indicates the name of PW. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.119.1.1.11.1.14 |
hwVplsLdpPeerIgnoreStpLoopCheck |
INTEGER{enabled(1),disabled(2)} |
read-create |
This object indicates the enable sign of the ignorer of STP loop check. |
The actually supported access is read-only. |