This table displays information about the committed access rate (CAR) configuration on the interface. The configuration limits the traffic rate on the interface.
The indexes of the table are hwXQoSIfCarCfgIfIndex, hwXQoSIfCarVlanID, hwXQoSIfCarDirection.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.4.1.2011.5.25.32.4.1.2.1.1.1 |
hwXQoSIfCarCfgIfIndex |
Integer32 |
read-only |
This object indicates the interface index. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.32.4.1.2.1.1.2 |
hwXQoSIfCarVlanID |
Integer32{(0,0),(1,4095)} |
read-only |
Vlan ID. -1 can't be set. 0 is the default value |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.32.4.1.2.1.1.3 |
hwXQoSIfCarDirection |
INTEGER{inbound(1),outbound(2)} |
read-only |
This object indicates the upstream and downstream traffic on an interface. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.32.4.1.2.1.1.9 |
hwXQoSIfCarGreenAction |
INTEGER{pass(1),discard(2),remarkIpPrec(3),remarkDscp(4),remarkMplsExp(5),remark(6),remark8021p(7)} |
read-create |
Green Action: pass (1) discard (2) remark IP Precedence (3) remark DSCP (4) remark MPLS EXP (5) remark (6) Hardware QoS : pass,discard,remark. Software QoS : pass,discard,remark IP Precedence,remark DSCP,remark MPLS EXP. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.32.4.1.2.1.1.11 |
hwXQoSIfCarYellowAction |
INTEGER{pass(1),discard(2),remarkIpPrec(3),remarkDscp(4),remarkMplsExp(5),remark(6),remark8021p(7)} |
read-create |
Action for yellow packets: Unavailable (-1), pass (1), discard (2), mark IP priority (3), mark DSCP (4), mark MPLS EXP (5), and mark (6). Only the hardware service quality supports this object, and the hardware service quality supports pass, discard, and mark. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.32.4.1.2.1.1.13 |
hwXQoSIfCarRedAction |
INTEGER{pass(1),discard(2),remarkIpPrec(3),remarkDscp(4),remarkMplsExp(5),remark(6),remark8021p(7)} |
read-create |
Action for red packets: pass (1), discard (2), mark IP priority (3), mark DSCP (4), mark MPLS EXP (5), and mark (6). Hardware service quality: pass, discard, and mark. Software service quality: pass, discard, mark IP priority, mark DSCP, and mark MPLS EXP. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.32.4.1.2.1.1.15 |
hwXQoSIfCarRowStatus |
INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)} |
read-create |
RowStatus. Three actions are used: active, createAndGo, destroy |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.32.4.1.2.1.1.16 |
hwXQoSIfCarCirEx |
Unsigned32 |
read-create |
This object indicates the CIR. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.32.4.1.2.1.1.17 |
hwXQoSIfCarCbsEx |
Unsigned32 |
read-create |
Committed Burst Size. Unit: byte. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.32.4.1.2.1.1.18 |
hwXQoSIfCarPirEx |
Unsigned32 |
read-create |
This object indicates the PIR. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.32.4.1.2.1.1.19 |
hwXQoSIfCarPbsEx |
Unsigned32 |
read-create |
Peak Burst Size. Unit: byte. |
The actually supported access is read-only. |