isisSysTable

1.3.6.1.3.37.1.1.1.1.1

isisSysInstance

Unsigned32{(1,4294967295)}

not-accessible

The unique identifier of the Integrated IS-IS

instance to which this row corresponds.

This object follows the index behavior.

The actually supported value range is 1-4294967295.

1.3.6.1.3.37.1.1.1.1.2

isisSysVersion

OCTET STRING{(0,255)}

read-only

The version number of the IS-IS protocol which this

instance implements.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.37.1.1.1.1.3

isisSysType

INTEGER{level1IS(1),level2IS(2),level1L2IS(3)}

read-create

The type of this instance of the Integrated

IS-IS protocol. This object follows the

replaceOnlyWhileDisabled behavior.

The actually supported access is read-only.

1.3.6.1.3.37.1.1.1.1.4

isisSysID

OCTET STRING{(6,6)}

read-create

The ID for this instance of the Integrated IS-IS

protocol. This value is appended to each of the

area addresses to form the Network Entity Titles.

The derivation of a value for this object is

implementation-specific. Some implementations may

automatically assign values and not permit an

SNMP write, while others may require the value

to be set manually.

The actually supported access is read-only.

1.3.6.1.3.37.1.1.1.1.5

isisSysMaxPathSplits

Integer32{(1,128)}

read-create

Maximum number of paths with equal routing metric value

which it is permitted to split between. This object

follows the replaceOnlyWhileDisabled behavior.

The actually supported access is read-only.

The actually supported value range is 1-128.

1.3.6.1.3.37.1.1.1.1.6

isisSysMaxLSPGenInt

Integer32{(1,65534)}

read-create

Maximum interval, in seconds, between generated LSPs

by this instance of the protocol. This object follows

the resettingTimer behavior.

Should be at least 300 seconds less than isisSysMaxAge.

The actually supported access is read-only.

The actually supported value range is 1-65534.

1.3.6.1.3.37.1.1.1.1.7

isisSysPollESHelloRate

Unsigned32{(1,65535)}

read-create

The value, in seconds, to be used for the suggested ES

configuration timer in ISH PDUs when soliciting the ES

configuration.

The actually supported access is read-only.

1.3.6.1.3.37.1.1.1.1.8

isisSysWaitTime

Unsigned32{(1,65535)}

read-create

Number of seconds to delay in waiting state before

entering on state. This object follows the resettingTimer

behavior.

The actually supported access is read-only.

1.3.6.1.3.37.1.1.1.1.9

isisSysAdminState

INTEGER{on(1),off(2)}

read-create

The administrative state of this instance of the

Integrated IS-IS protocol. Setting this object to the

value 'on' when its current value is 'off' enables operation

of this instance of the Integrated IS-IS protocol.

The actually supported access is read-only.

1.3.6.1.3.37.1.1.1.1.10

isisSysLogAdjacencyChanges

INTEGER{true(1),false(2)}

read-create

If true, causes IS-IS to generate a log message when an

IS-IS adjacency changes state (up or down).

The actually supported access is read-only.

1.3.6.1.3.37.1.1.1.1.11

isisSysNextCircIndex

INTEGER{(0,2147483647)}

read-only

This object is used to assign values to

isisCircIndex as described in 'Textual

Conventions for SNMPv2'. The network manager

reads this object, and then writes the value

back as the isisCircIndex in a SET that creates

a new instance of isisCircEntry. If the SET

fails with the code 'inconsistentValue', then

the process must be repeated; If the SET succeeds,

then the object is incremented, and the new

isisCircuit is created according to the manager's

directions.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.3.37.1.1.1.1.12

isisSysL2toL1Leaking

INTEGER{true(1),false(2)}

read-create

If true, allow the router to leak L2 routes into L1.

The actually supported access is read-only.

1.3.6.1.3.37.1.1.1.1.13

isisSysMaxAge

Unsigned32{(2,65535)}

read-create

Value to place in RemainingLifeTime field of

the LSPs we generate.

This is should be at least 300 seconds greater than

isisSysMaxLSPGenInt.

The actually supported access is read-only.

The actually supported value range is 2-65535.

1.3.6.1.3.37.1.1.1.1.14

isisSysReceiveLSPBufferSize

Unsigned32{(512,16384)}

read-create

Size of the largest Buffer we are designed or

configured to store. This should be at least

as big as the maximum isisSysOrigLSPBuffSize

supported by the system.

If resources allow, we will store and flood LSPs

larger than isisSysReceiveLSPBufferSize, as this

can help avoid problems in networks with different

values for isisSysOrigLSPBuffSize.

The actually supported access is read-only.

The actually supported value range is 512-16384.

1.3.6.1.3.37.1.1.1.1.15

isisSysExistState

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

The state of the IS-IS router. Turning this to

state 'destroy' forces the router to forget all

the current configuration. Setting the state to

'notInService' stops protocol processing, but

retains the configuration.

The actually supported access is read-only.