The set of IP summary addresses to use in forming summary TLVs originated by this Intermediate System.
An administrator may use a summary address to combine and modify IP Reachability announcements. If the Intermediate system can reach any subset of the summary address, the summary address will be announced instead, at the configured metric.
The indexes of the table are isisSysInstance, isisSummAddressType, isisSummAddress, isisSummAddrPrefixLen.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.3.37.1.1.5.1.1 |
isisSummAddressType |
INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)} |
not-accessible |
The Type of IP address for this summary address. This object follows the index behavior. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.3.37.1.1.5.1.2 |
isisSummAddress |
OCTET STRING{(4,4),(16,16)} |
not-accessible |
The IP Address value for this summary address. This object follows the index behavior. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.3.37.1.1.5.1.3 |
isisSummAddrPrefixLen |
Unsigned32{(0,128)} |
not-accessible |
The Length of the IP NetMask for this summary address. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.3.37.1.1.5.1.4 |
isisSummAddrExistState |
INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)} |
read-create |
The existence state of this summary address. This object follows the row status behavior. |
The actually supported access is read-only. |
|
1.3.6.1.3.37.1.1.5.1.5 |
isisSummAddrMetric |
Integer32{(0,63)} |
read-create |
The metric value to announce this summary address with in LSPs generated by this system. |
The actually supported access is read-only. |
|
1.3.6.1.3.37.1.1.5.1.6 |
isisSummAddrFullMetric |
Unsigned32{(0,4261412864)} |
read-create |
The wide metric value to announce this summary address with in LSPs generated by this system. |
The actually supported access is read-only. The actually supported value range is 0-4261412864. |